Shopping For:
  1. Clear Selected Ride Clear Selected Ride
  2. Manage Saved Rides
  3. Change Your Selected Ride
2004 Arctic Cat DVX400

Barnett Clutch Kit

$184.99

Please choose an available item.

In Stock - Ships Today
Have it by May 28th when you order by 5:00pm PST.
FITS: 2004 Arctic Cat DVX400 change
 
It appears you may have cookies turned off in your web browser, or are using a browser that does not support cookies. You must accept cookies to use our site. For questions call us at 1-888-676-8853.

Need Assistance?

Call 1-866-667-6288

You may also like

EBC Dirt Racer Clutch Kit - 2004 Arctic Cat DVX400 Barnett Clutch Kit
EBC Dirt Racer Clutch Kit
$94.99
Newcomb Clutch Cover Gasket - 2004 Arctic Cat DVX400 Barnett Clutch Kit
Newcomb Clutch Cover Gasket
$17.99
Hinson Billet Clutch Basket - 2004 Arctic Cat DVX400 Barnett Clutch Kit
Hinson Billet Clutch Basket
$229.99
You Save: $20.00
Barnett Clutch Kit - Main
zoom: + −

Product Description

  • Barnett clutch kits are designed to tolerate whatever you can deliver with their top quality construction and components.
  • Barnett has been developing their burly clutch kits since 1948 for dirt bikes, street bikes, and ATVs.
  • The Barnett clutch kits are built with Kevlar fiber plates. Kevlar is the same material found in bullet proof vests, which make these clutch kits extremely tough.
  • Barnett clutch kits also include durable tempered steel friction plates that have been processed through their vibratory deburring followed by flatness testing to ensure optimum performance.
  • The heavy duty clutch springs have also been produced for durability by using shot-peened processing and heat treating.
  • Expect better clutch feel, performance and abuse control when you install the Barnett clutch kit in your application.
  • Note: not all street bike kits will include fiber plates, friction plates and heavy duty springs.
  • Customer Reviews
  • Ask an Expert
  • Also Offered For
(114)
4.2 out of 5 stars
5 star   77
4 star   14
3 star   4
2 star   2
1 star   17
Write a Review
“ i love this clutch im running it in a built cr250r 2000 this clutch is prolly the strongest bitting c... ”
racerx657541 Location: San antonio, TX
“ This is one of the best clutches i have ever baught. ”
jakeg
“ The couch is a bit stiffer. ”
VanDii Location: Santa Fe, TX.
1-10 of 114
Overall
Durability
Ease of Installation
Performance
Power
Style
Verified Purchaser Featured
Location: Sacramento, CA
Barnett Clutch Kit
Very easy to install, and works great. I put this clutch through the ringer, during a marthon race through tight and rocky single track. I heated this clutch up, and it still preformed great. I have had the clutch in now for about 3 months, and it still works great.
Overall
Durability
Ease of Installation
Performance
Power
Style
Verified Purchaser
Location: augusta ga
Great product
I was going to buy an oem clutch kit, but I found the Barnett kit to be a better product for the money. As always, Motosport shipped it to me next day. Thanks Bryan Kirkland
Overall
Durability
Ease of Installation
Performance
Power
Style
its a sleeper i powder coated it myself
Location: San antonio, TX
Wow what a clutch
i love this clutch im running it in a built cr250r 2000 this clutch is prolly the strongest bitting clutch i have ever used, the stiffer springs i barely noticed on the track i abuse the heck out of my clutches i go into the corner with the clutch pulled in over revving my engine then drop it ive had this clutch for almost two years now and when i took it out and inspected it it looks barely used my brother also uses these clutches in his 4 different cr500r great clutch i will never try something else
Overall
Durability
Ease of Installation
Performance
Power
Style
Verified Purchaser Top 250 Contributor
Location: Pittsburgh PA
Very impressed with this product
I havent had a clutch ever perform this well. Im not sure about the durability yet but im sure they will last. I woudl deffinetly buy this product again.
Overall
Durability
Ease of Installation
Performance
Power
Style
Location: Grenville MS
Great clutches
Great clutches, Complte kit fits correct
Overall
Durability
Ease of Installation
Performance
Power
Style
Verified Purchaser
Location: Moriah, New York
Great Clutch system
I love this cluutch kit. It gives my bike more power when shifting and was easy to istall. And was reasonably cheap for a qualitty clutch syetem. I would definately recommend this product to a freind
Overall
Top 1000 Contributor
Location: Auburn, AL
Clutch
Barnett clutches are the way to go. Replaced tired clutch in a 250, work these over pretty hard on tight trails and hill climbs and they are always there, no fade, very durable. Great clutches.
Overall
Top 1000 Contributor
Great clutch
This is one of the best clutches i have ever baught. I have this on my 03 cr250 and its smooth and reliable.
Overall
Location: Santa Fe, TX.
Grips w/o slip!!
The couch is a bit stiffer. But this is an easy and good replacement! 06 YZ250
Overall
Location: Cohasset Ca
Good Clutch
The clutch went in easily. The only issue I had was the springs were a little too stiff to get the clutch to slip at all which with a 2 stroke can be a problem. So far I would have no problems buying another one.
1-10 of 114
Total Questions (13)
Questions with answers:
  13
Questions without answers:
0
Have a question?
“ Are the friction plates Kevlar or Carbon in this kit?... ”
hardware Location: big bad MT
“ What all do I need to replace a clutch on a 99 cbr600 f4?... ”
nipsar
“ What do I do?... ”
LJ257
1-10 of 13
rider7488 Over 3 years ago Location: Fort McMurray, Alberta, Canada
Who to trust?
I race and do ice racing in the winter here up north in canada, I am purchasing this barnett clutch but I have worries. i read all the reviews and there are a lot of awesome reviews from top contributers. But there are also a lot of bad reviews from guys saying it started slipping during second moto's or in a week and stuff like that. My guess is that they did not let it soak in oil. Is there an expert answer or does motosport use these clutches in their race teams? hmm... I'm going to give it a shot anyway
MotoSport Staff
Over 3 years ago Location: P+RTLAND
It really depends on who you ask. I've ran Barnett for years and have been happy with them. Like you said, some reviews are bad and i'm not saying they installed the clutch wrong or anything but there are so many different variations in riding styles, types of riding, oils people use, did they soak the plates etc etc so it's really hard to say that some of the problems people have had are due to quality or manufacturing issues. Just like any other product on the market, some like em', some dont.
2 years 11 months ago Location: Ashland,OR
I'm not an expert but i can tell you that these things suck,i would just buy oem or go with anything but barnett i put it in my raptor and couldn't even pull a brody on pavement,i put in another stock one and bam right there my tires were pretty much gone...i just recently put in an ebc and they are good too if i was you buy oem or ebc
Answer this Question
hardware Over 3 years ago Location: big bad MT
Are the friction plates Kevlar or Carbon in this kit?
Best Answer
Over 3 years ago Location: mass
I am sure they are Kevlar. I have had it for 2 mos now. Nice grab off the perch. Make sure you soak the plates in oil for a half hr before you assemble
Top 25 Contributor Top 50 Contributor
Over 3 years ago Location: I Live in Adams TN Race 25 times a year Vet AM
The plates are fiber.
Over 3 years ago
Yes, the plates are kevlar as it say in the description "•The Barnett clutch kits are built with Kevlar fiber plates. Kevlar is the same material found in bullet proof vests, which make these clutch kits extremely tough."
Answer this Question
yzyammy Over 3 years ago Location: yzyammy
Is it my clutch?
i have a 2000 yz250 that i think is fairly underpowered. i watch vids of these bikes and the front ends come up like crazy. well mine doesn't unless i pull all i am worth. it seems to run ok but just doesn't have a very good snap like i think these bikes should have. i have a new piston in it. is this my clutch?? if not please list all probable things that may be wrong. thanks a lot
MotoSport Staff
Over 3 years ago Location: P+RTLAND
Could be your clutch slipping, but its hard to say since the bike is not in front of me. Pull your clutch apart and check your disks and see what condition they are in.
Top 500 Contributor
2 years 10 months ago
it could either be that your clutch basket is slipping or need new springs. What this clutch kit will do is give a little more snap when giving it gas after switching gears or letting out the clutch.
Answer this Question
nipsar Over 3 years ago
What all do I need to replace a clutch on a 99 cbr600 f4?
MotoSport Staff
Over 3 years ago Location: Tualatin
It depends on what all needs to be replaced but it is usually the fiber plates, steel plates and springs which come in this kit.
Answer this Question
gogst Over 3 years ago Location: cali
I have a Hinson pakage with every thing can i use barnnett clutches with that set up?
its in a 06 yz250f
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR
If you have a hinson kit that can accommodate a stock OEM clutch kit, than this Barnett will fit.
Top 500 Contributor
2 years 10 months ago
yes i did the same thing. I got the Hinson clutch basket and this clutch kit works perfectly.
Answer this Question
LJ257 Over 3 years ago
What do I do?
I have an 03 CRF450R when i pull in the clutch to put my bike in gear, an tap my shift lever it clicks loudly when it gets in gear, then when i up shift i have to have the rpm's up high and nearly pull a muscle just to go up a gear, I've set my clutch lever, so i don't know what else it could be other than i need a new clutch. Am I right or wrong?
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR
Sorry, you will need to contact your local service technician for advise.
Over 3 years ago
Just adjust your cable, also change your oil if you have old oil it will cause these symptoms
Answer this Question
HondaRacer6 Over 3 years ago
I have a 1994 cr125?
do i need a new clutch if you put you bike in gear and let out the clutch all the way the bike dosent move barely at all when giving it gas? (this is when its running)
Expert MotoSport Staff
Over 3 years ago Location: Portland, OR
You might want to consult your local shop technician.
Answer this Question
townmx Over 3 years ago Location: worthington
When i pull in my clutch lever while the bike is in gear, it still moves foward, What all needs replaced in my bike?
The bike is started and in gear, the clutch is engaged, im still rollin'.
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR
If you've inspected the cable and have it adjusted correctly than it's probably time for a new clutch. The best indication of a clutch going out is having it slip when you're riding it. At high revs the bike will feel like the clutch is engaged. With that said take you bike into your local service department and have the experts look into the problem.
Answer this Question
DhMcr125 Over 3 years ago Location: Southbay Area
I bought the barnett clutch for my stock 2000 cr 125 but it feels like it still needs a new clutch, why is that?
i noticed when i took off the old clutch that the fiber padding on the old ones were at the pretty much same level as the new barnett
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR
You may have to take your bike into the shop to have them take a look at what may be causing the issue.
Over 3 years ago Location: Indianapolis, IN
Try using a different oil in your transmission. Generally, use a 10w-30 or 10w-40 oil that says "MA" somewhere on the back of the bottle. Do not use an oil that says "energy conserving" anywhere on the bottle. The oil has to be specially formulated for a motorcycle clutch. Regular car oil will not work.
Answer this Question
wildcat Over 4 years ago
The 08 honda has a extra friction disk is it in this package?
MotoSport Staff Expert
Over 4 years ago
yes, it comes with everything you will need.
Answer this Question
1-10 of 13

ATV

Arctic Cat

Arctic Cat DVX400
Honda

Honda TRX300EX
Honda TRX300X
Honda TRX400EX
Honda TRX400X
Kawasaki

Kawasaki KFX400
KTM

KTM 450SX ATV
KTM 450XC ATV
KTM 505SX ATV
KTM 525XC ATV
Suzuki

Suzuki LT250R QUADRACER
Suzuki LT-R450
Suzuki LTZ400
Yamaha

Yamaha BANSHEE
Yamaha BLASTER
Yamaha RAPTOR 350
Yamaha RAPTOR 660
Yamaha RAPTOR 700
Yamaha WARRIOR
Yamaha YFZ450

Dirt Bike

Honda

Honda CR125
Honda CR250
Honda CR500
Honda CR80
Honda CR80 Big Wheel
Honda CR85
Honda CR85 Big Wheel
Honda CRF450R
Honda CRF450X
Honda XR400R
Honda XR650R
Kawasaki

Kawasaki KLX400R
Kawasaki KLX400SR
Kawasaki KLX450R
Kawasaki KX100
Kawasaki KX125
Kawasaki KX250
Kawasaki KX450F
Kawasaki KX500
Kawasaki KX60
Kawasaki KX65
Kawasaki KX80
Kawasaki KX85
KTM

KTM 125EXC
KTM 125SX
KTM 144SX
KTM 150SX
KTM 200EXC
KTM 200MXC
KTM 200SX
KTM 200XC
KTM 200XCW
KTM 250EXC
KTM 250EXC-RFS
KTM 250MXC
KTM 250SX
KTM 250SXF
KTM 250XC
KTM 250XCF
KTM 250XCFW
KTM 250XCW
KTM 300EXC
KTM 300MXC
KTM 300XC
KTM 300XCW
KTM 350SXF
KTM 350XCF

KTM 380EXC
KTM 380MXC
KTM 380SX
KTM 400EXC
KTM 450EXC
KTM 450MXC
KTM 450SX
KTM 450SXF
KTM 450XC
KTM 450XCF
KTM 450XCW
KTM 500EXC
KTM 500XCW
KTM 505SXF
KTM 505XCF
KTM 520EXC
KTM 520MXC
KTM 520SX
KTM 525EXC
KTM 525MXC
KTM 525SX
KTM 525XC
KTM 65SX
KTM 65XC
Suzuki

Suzuki DRZ400E
Suzuki DRZ400S
Suzuki RM100
Suzuki RM125
Suzuki RM250
Suzuki RM80
Suzuki RM85
Suzuki RM85L
Suzuki RMX450Z
Suzuki RMZ450
Yamaha

Yamaha WR250
Yamaha WR250F
Yamaha WR400F
Yamaha WR450F
Yamaha YZ125
Yamaha YZ250
Yamaha YZ250F
Yamaha YZ400F
Yamaha YZ426F
Yamaha YZ450F
Yamaha YZ80
Yamaha YZ85

Motorcycle

Kawasaki

Kawasaki ZX1200 - Ninja ZX-12R
* required entry

Forgot your password?