Shopping For:
  1. Clear Selected Ride Clear Selected Ride
  2. Manage Saved Rides
  3. Change Your Selected Ride
1991 Yamaha BANSHEE

Streamline Front And Rear Brake Line Kit

Retail: $129.99
$107.99
You Save: $22.00 (17%)
Free 3-day express shipping
This item qualifies for free shipping Shipping Info

Please choose an available item.

Please make your selections below to view availability
FITS: 1991 Yamaha BANSHEE change
 
It appears you may have cookies turned off in your web browser, or are using a browser that does not support cookies. You must accept cookies to use our site. For questions call us at 1-888-676-8853.

Product Description

  • Streamline stainless braided lines are made using Teflon smooth bore liner with an extra tight stainless steel over braid reducing line expansion to almost zero.
  • All brake lines are coated with a UV-protected PVC clear-coat that protects chrome, paint, fenders, and body work from damage.
  • All fittings used are triple-chrome plated for extreme corrosion protection and a killer look.

You may also like

Streamline Front Brake Line - 1991 Yamaha BANSHEE Streamline Front And Rear Brake Line Kit
$79.99
You Save: $10.00
  • Customer Reviews
  • Ask an Expert
  • Also Offered For
(9)
4.4 out of 5 stars
5 star   6
4 star   1
3 star   2
2 star 0
1 star 0
AndyII Location: Avon,IN
yamaslayer Location: West-central Wisconsin
1-9 of 9
Overall
Durability
Ease of Installation
Performance
Style
Location: virginia beach, virginia
Streamline Fr/R brake line kit
Good kit overall, but needs to have better washers for the banjo bolts, if possible retain you stock brass washers just in case you have leaks. Your stock washers are still good, especially if this is the first time you've taken your brake system apart.
Overall
Durability
Ease of Installation
Performance
Style
Top 10 Contributor
Location: Jacksonville, NC
STREAMLINE FRONT & REAR BRAKE LINE KIT
Installation went ok except make sure you run your lines to the calipers first then tighten your "T" link. My biggest complaint was the stainless flat washers that come with the lines/bolts to go on each side of the banjo bolt (where the line connetcs to the master cyclinder and calipers LEAKED. Master cylinder and right caliper both leaked - *I had to end up using my old OEM washers(which were the copper ones) and had no problems afterward.
Overall
Top 50 Contributor Top 100 Contributor
Location: Ewa Beach, HI
Best purchase for your bike
very light durable and nice looking, highly recommended. Works great for my extended a arms..
Overall
Location: Newkirk, OK
Must for racing
Perfect fit, look great, noticeable change in braking. Wish they would come with the clamps for the price you pay thou.
Overall
Location: Avon,IN
Looks Great
Very easy to install. Unlike a previous reviewer I did not need to use the stock hardware to install the new lines. They look great and seem to improved the stopping power on my ATV. The only thing I would recommend is to purchase new brake line clamps to mount to the A-arms.
Overall
Top 1000 Contributor
Location: New kensington, PA
Stop on a dime
Best break lines i have ever had excellant stopping power.
Overall
Location: West-central Wisconsin
Cant say anything bad
These brakelines are great, the best there is I feel. I got the red ones, and they look really good too.
Overall
Top 500 Contributor
Location: Willits,CA.
Very nice product
easy install, looks great. I did have to use old hardware. caliper bolts were wrong thread.
Overall
Top 250 Contributor
Location: Lafayette, IN
Stop on a dime!
Stainless stell brake lines improve the stopping power of your quad. No flex like stock rubber hoses. This is also a safety improvement and a must for the hard core rider and racer!
1-9 of 9
Total Questions (4)
Questions with answers:
  4
Questions without answers:
0
1-4 of 4
jasonrock Over 3 years ago
Will this set fit a plus 2 stem? if not which one will?
MotoSport Staff
Over 3 years ago Location: P+RTLAND
I would run a plus two cable just to make sure you have the necessary length.
jef71786 Over 3 years ago Location: Anniston, Al
Does this kit have the line that goes from the front master cylinder to the Y? Are the front lines a +2 length?
Expert MotoSport Staff
Over 3 years ago Location: Portland, OR
This includes three front lines (1 to the y and 2 to the calipers) and 1 rear brake line.
mjbeaty Over 4 years ago Location: Elk Grove, CA
Is the front line set a "Y" type or "two-separate lines - Longer Banjo" style?
MotoSport Staff Expert
Over 4 years ago
The front run a single line from the master cylinder with a splitter near the bottom of the steering stem.
ridna660r Over 4 years ago
Will the +2 lines fit to stock A-Arms?
I have stock a-arms right now but in the future i plan on buying a set of +2 extended arms. will these work with the stock length or will they be too long?
MotoSport Staff Expert
Over 4 years ago
Sure they will fit, but they can also bind up due to the extra length. I would hold out until you actually get the a-arms, then install the lines.
1-4 of 4

ATV


Arctic Cat

Arctic Cat DVX400

Honda

Honda TRX250R
Honda TRX300EX

Honda TRX300X
Honda TRX400EX
Honda TRX400X

Honda TRX450R (ELECTRIC START)
Honda TRX450R (KICK START)

Kawasaki

Kawasaki KFX400

Kawasaki KFX700

Polaris

Polaris PREDATOR 500

Suzuki

Suzuki LT250R QUADRACER
Suzuki LT500R QUADRACER

Suzuki LT-R450
Suzuki LTZ400

Yamaha

Yamaha BANSHEE
Yamaha BLASTER
Yamaha RAPTOR 350

Yamaha RAPTOR 660
Yamaha RAPTOR 700
Yamaha WARRIOR

Yamaha YFZ450
Yamaha YFZ450R
* required entry