Everything you want, nothing you don't. Introducing the Vector-2, the latest version of Arai's hugely popular, "less-is-more" Vector model. Specifically crafted for the rider who doesn't need bells and whistles, but can't imagine riding without the Arai family's three generations of handmade care and craftsmanship, protection, performance, comfort and fit.
The Vector-2 has Arai's Intermediate Oval (IO) interior fit shape.
5 mm Peel-Away Side / Temple Pad Layer:
The Vector-2 has a 5 mm peel-away layer added to the removable interior comfort liner's side / temple pad, giving you another level of customization.
This newly sculpted lower reinforcement band provides stability and a lower center of gravity for a very lightweight feeling. Specifically sized exhaust ports increase airflow while minimizing noise levels. And the larger bottom opening makes for easier on-off.
Unique Patented Chin Vent Design:
The Vector-2's two-position detent adjustment allows incoming air to be directed to either the facial area for cooling or onto the shield to help clearing if needed.
5 mm Peel-Away Cheek Pad Layer:
Giving you even more ability to craft the perfect fit and comfort for your face, the cheek pads now feature a 5 mm peel-away layer for added room if needed.
The new ACF-2 front intake vent incorporates a sliding door that closes the oversized intake opening completely. At the same time the outer gate closes the intake opening, an inner plate slides over and closes the hole in the shell. The ACF-2 is now available as an accessory part.
Tuned Rear Vent / Wing:
ACR-2 rear exhaust vent-wing combo: wind-tunnel tuned air inlets markedly improve ventilation performance and helmet stability at speed.
Pro Shade System Compatible:
This model accepts the optional Pro Shade System (sold separately).
Meets or exceeds SNELL and DOT standards
Note: Fluorescent and/or bright finishes fade over time and exposure to sunlight. This is normal and is not covered by warranty.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.