Improving on Arai's already legendary Signet-Q long-oval model, the Signet-Q Pro-Tour comes pre-equipped from the Arai workshop with the innovative Pro Shade visor system, providing quick and easy visor shading whenever the need arises. The Signet-Q Pro Tour is also lined with Arai's anti-microbial Eco-Pure liner to help stay fresher between cleanings, as well more room in the ear pocket for communication system speakers.
The Signet-Q Pro-Tour has Arai's Long Oval (LO) interior fit shape.
Pro Shade System:
The Signet-Q Pro-Tour comes pre-equipped with Arai's Pro Shade System, providing shade and reducing glare in addition to acting as a peak. A clear Pinlock insert for the Max Vision Brow Vent Pro Shade comes standard in the box and only requires a minute to install.
The Signet-Q Pro-Tour also includes a new exclusive liner with "Eco-Pure" antimicrobial material, so it stays fresher between cleanings.
The ear pockets of the new Signet-Q Pro-Tour have molded pockets to better accept speakers for a more comfortable fit.
The Fit You've Been Missing:
The Signet-Q's longer shell and interior shape are specifically designed for riders whose helmets can cause painful forehead "hotspots" due to interior shapes that aren't made to fit their longish heads.
FCS Cheek Pads:
Arai's peel-away FCS Cheek Pad design delivers comfort and support, and it features their 5 mm peel-away custom-fit layer and Emergency Release System.
5 mm Peel-Away Side-Temple Pad:
Arai's peel-away side-temple crown pads give you the option of 5 mm more of interior width if needed. Yet another level of fit customization no other helmet brand offers.
Brow-Vent Channeling Ventilation:
Directs more cooling air to the temple area without the need to punch holes in the critical forehead area of the shell or impact-energy-absorbing EPS liner.
More Aerodynamic Upper- and Side-Exhaust Vent Cowling:
Sculpted to enhance stability while increasing exhaust efficiency, the side vent cowls are tailored to the needs and speeds of the street.
Meets or exceeds SNELL and DOT standards.
Note: Fluorescent and/or bright finishes fade over time and exposure to sunlight. This is normal and is not covered by warranty.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.