Applied Racing Bar Mounts

Applied Racing Bar Mounts
Applied Racing Bar Mounts

$59.99 - $79.99

  • Description
  • 4 Reviews
  • 14 Questions
  • Fitment
Description Item #APP000S
  • Includes oversized 1-1/8" bar mounts with 12 mm diameter D-bolts and rubber cones specifically made for the larger diameter D-bolts.

Read More
4 Reviews
4.5 out of 5 stars
5 Star   3 4 Star   1 3 Star   1 2 Star   0 1 Star   0
Blumpkin
Verified Purchaser
East Bay, Ca.
BAr mounts

These are for mounting oversize (1-1/8") on my CR250R, they are rubber mounted just like the oem bits I was replacing.

TrailRider
Top 500 Contributor Verified Purchaser
SO.CA.
Applied Racing Bar Mounts CRF450X

I bought these oversize plus 10mm rise for my EVO Fat Bars. I wanted to raise the fork tubes to lower the front of the bike, plus I wanted new bars. The 10 mm rise enabled me to raise the fork tubes 7/8" in the triple trees. I used the Devol lowering link for the rear. I would have gave these clamps 5 stars but one of the clamps top caps had some nasty machine marks on top which doesn't effect the performance, just appearance. The price was right at MotoSport.

Timz
Verified Purchaser
Corvallis, OR
Applied Bar Mounts

This is my second set of bar mounts from Applied Racing. Highly recommend these to anyone with oversize handlebars.

motowrangler
Top 50 Contributor
cedar creek, tx
Excellent

They fit & clamp better than stock plus you can replace clamp mounting d bolts instead of the complete bottom piece & less expensive than stock.


Read More
14 Questions
Answered:   14
Not Yet:   0
James
Location: Maryland
Q: Rubber Cones?
1 month 8 days ago
Do they come with the rubber cones?
MotoSportExpert
Expert MotoSport Staff
1 month 8 days ago
A: No. The Applied Racing Bar Mounts do not come with cones. The cones can be found here:
http://www.motosport.com/applied-rubber-cones-for-bar-mounts
Matt
Location: Ardmo
Q: What oversize do I use for 1"1/8 bars?
1 year 5 months ago
MotoSportExpert
Top 1 Contributor
1 year 5 months ago
A: Both options for the Applied Racing Bar Mounts are for oversized bars. You have options on the height of the units, +5 or +10mm
mx146
Location: ga.
Q: I have stock bars on kx 250f 2012 will these fit?
1 year 10 months ago
MotoSportGrantK
MotoSport Staff Expert
1 year 10 months ago
A: No, unfortunately Applied does not offer these for the 2012 Kawasaki KX250F. Kawasaki offered that bike with the 7/8" bars and bar mounts or the optional 1 1/18" bars and bar mounts. You will want to know which bar size you have before ordering new ones. If the bar is the same diameter where they mount as where the controls are, you likely have 7/8" bars.
ongoing37
Q: Do these come with the bolts?
Over 6 years ago
Drewski
MotoSport Staff
Over 6 years ago Location: P+RTLAND
A: Yes, the D-bolt is included.
britton290
Q: Would this fit a Pro-taper contour on a 2007 RM-Z 250f?
Over 6 years ago
MotoMoo2
Expert MotoSport Staff
Over 6 years ago Location: Portland
A: These are designed to fit any 1-1/8" oversized handlebar, but will only mount to the Applied top clamp.
vinny229
Q: Do the applied bar clamps have a 5mm reverse adjustability, so if you turn them around from stock they go forward 5mm?
Over 6 years ago
thanks!
MotoMoo2
MotoSport Staff Expert
Over 6 years ago Location: Portland
A: No, these are mounted through the center of the clamp.
GrimRipper
Q: Are these avail in + 15 and in any other colors?
Over 6 years ago
I've seen them advertized elsewhere with these options
Drewski
MotoSport Staff
Over 6 years ago Location: P+RTLAND
A: I'm pretty sure they offer them in a +15 and different colors, but I dont stock them. If you can get a part number for the ones you want from Applied I can order some in. Call in for more details.
Jeremy4v
Location: Minnesota
Q: Will these fit if I allready have an applied racing tripple clamp?
Over 6 years ago
If they do fit which bike do i select to order, I have a 1999 yamaha yz400f
james718
MotoSport Staff Expert
Over 6 years ago Location: Portland, OR
A: For use on stock or Applied clamps that are rubber mounted.
mxer519
Location: Iowa
Q: Will these bar mounts bolt to a stock 06 yamha yz 450 clamp?
Over 7 years ago
james718
MotoSport Staff Expert
Over 6 years ago Location: Portland, OR
A: These will not mount to your stock triple clamps.
Chris93
Q: How tight do I torque the allen bolts?
Over 7 years ago
I have these bar mounts and lost the instructions. want to know how tight to tighten the allen bolts to hold the bars tight but don't want to over do it. thanks
james718
MotoSport Staff Expert
Over 7 years ago
A: please contact your local service department for this question.
1-10 of 14

Read More
Fitment
See bike s that Fit this Part

Read More