For orders of $49.00 or more
Orders over $49.00 will receive free 3-day express shipping. This is a residential delivery service, with deliveries Monday through Friday from 9:00am to 8:00pm.
Applied Factory R/S Triple Clamp Set With Pro Taper Contour Handlebar Combo
The MotoSport.com Applied Factory R/S Triple Clamp Set With Pro Taper Contour Handlebar Combo includes one each of the following:
Applied Factory R/S Triple Clamp Set With Oversized Bar Mounts:
The new RS line is unlike any on the market today. The rubber / solid design is the best of both worlds.
For oversized bars.
Superior system to the previous conical-shaped bushings.
Proprietary urethane elastomer bushings provide excellent vibration damping characteristics; this strong and abrasion-resistant formula withstands over 2200 PSI.
The elastomer bushings are contained in machined pockets on the top clamp, then precision machined.
Stainless steel collars are inserted into the elastomer bushings providing a mechanical restraint while still isolating the bar mounts from vibration.
The bar mount is then secured with a strong grade 10.9 bolt.
The proper torque secures the bar mount and pre-loads the elastomer bushings; pre-load ensures the bushings completely fill the pockets and isolate the bar mounts.
Also included in the kit is a set of 6061 aluminum bushings; these precision-machined solid bushings fit into the pockets in place of the elastomer bushings and create a solid mount system.
Feature offset mounting holes for adjusting handlebar location.
Top it off with the included one-piece bar clamp to tie both mounts together and you have a twist-free rubber or solid system.
Includes R/S top triple clamp, R/S bottom triple clamp, elastomer and solid bushings, bar mounts, one-piece bar clamp, and hardware.
Made in the USA!
Note: Includes Oversized 1-1/8" Bar Mounts.
Pro Taper Contour Handlebars - Oversize 1-1/8":
In 1991, Pro Taper introduced the 1-1/8-inch Taperwall handlebar and the industry hasn't been the same since. The Corona, CA based company expanded its product line to include clutches, sprockets and grips, among others, but Pro Taper never turned its back on what landed them in the motocross world.
The Pro Taper Contour Handlebar - Oversized is a best seller and made with the same quality as its Standard 7/8-inch Pro Taper brother, it's just, well, oversized! Check out the features that come with this solid beast and you'll understand why it's a must-have on the race course by riders like Nate Adams, Levi Sherwood and Robbie Maddison.
Made with aerospace-grade aluminum and 5 mm wall tubing.
Chemically applied scratch and peel-resistant graphics.
Hondarider942 years 3 months agoLocation: Newport News, VA, USA
Is it really that durable?
I've had a lot of trouble before with bar mounts. I'll ride a few times drop the bike once during race practice or something and the bushings are all out of wack because of one easy drop. Then I have to go back take off the bars and try to force the bushings straight again. Will buying something like this stay straight in more situations where I drop the bike even lightly?
2 years 3 months agoLocation: Portland, OR, USA
What you are dealing with with is kind of a give and take issue with the rubber bar mounts. While they provide a more dampened ride that is not as hard on your hands and have some give when crashing to help prevent broken and bent parts, they can displace fairly easily. This kit will help especially if you use the one piece top bar clamp. With the new design of the bushings it will not displace and keep your bars aligned after a crash.