Taking the modular-helmet concept to the next level, the Numo Evo ST has been homologated in both the closed and open positions, and its compact design when in the latter configuration means aerodynamic performance is surprisingly capable. There's an internal drop-down sun visor, and the new interior is designed for maximum comfort, with high-tech fabrics and carefully positioned stitching. The ultimate in adaptability, this helmet is equally appropriate for city riding and out of town.
Shell in HIR-TH (High Resistance Thermoplastic Resin) with four-densities EPS structure developed in two sizes.
The chin guard mechanism is designed to allow a compact design in "jet" configuration.
The metal chin guard block system ensures the double homologation P/J.
IVS (Integrated Ventilation System) ventilation with four large front vents and two lateral extractors hollowed in the shell which direct air to the rider's head. All the air vents are adjustable.
New Numo Evo ST interiors construction is engineered to allow a stable, embracing and pressure-free fit and to maximize dynamic comfort.
Removable nose guard and new wind protector, which reduces the noise level.
The inner of the helmet is designed to offer the highest riding comfort without any stitches in sensitive areas. All parts are easily removable and washable.
Neck roll: Shalimar fabric with water resistant treatment, preventing water to be channeled inside the helmet. It features reflective inserts for a increased visibility in low light conditions.
Cheek pads: Ritmo fabric with Sanitized(r) (antibacterial protection), 2 Dry (moisture-wicking) and Microsense (premium skin comfort and wearing fluidity) treatments.
Crown pad: Shalimar with the same treatments listed for check pads.
Anti-fog visor is designed for maximum vertical and lateral visibility.
Patented XQRS (Extra Quick Release System) visor mechanism with multiple steps. Two mechanisms to change the visor steps option are included in the box.
Integrated anti-scratch sun visor, removable without using tools.
Micrometric retention system.
Ready for Share communication system (sold separately).
Weight (DOT / ECE 2205): 1,935 grams, +-50 grams (in first shell size).
Homologation: DOT / ECE 2205.
Note: Ships with a Clear shield; all other tints sold separately.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye-brows and across the largest portion of the back of the head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.