The racing soul of AGV adapted to touring. This is the GT-Veloce.
The GT-Veloce has the same shell and strong points as the Pista GP and Corsa and this new full-face AGV touring model guarantees absolute performance in terms of safety, lightness, aerodynamics and ventilation. The look is now less aggressive due to the absence of the rear spoiler.
Research into the density of the inner components led to a less extreme fit that is better adapted to touring use. All this means is that the GT-Veloce is the perfect helmet for motorbike touring over any distance and under any weather conditions. Motorbike riders who choose this helmet can still enjoy the use of a product that is both sports like and captivating and its racing heritage is there for all to see.
SSL (Super Super Light) shell in composite fiber, Aramidic and carbon fiber.
Four (4) shell sizes.
IVS (Integrated Ventilation System) with channels formed directly in the outer shell and dynamic system with air vents and rear extractors.
Breathable Lycra micro-porous fabric lining and Dry-Comfort fabric with sanitizing treatment.
Fully removable and washable inner liners.
Race 2 flat, anti-scratch visor with wide field of vision, Pinlock ready and suitable for tear-off strips.
XQRS (Extra Quick Release System) visor removal and replacement without tools in just a few seconds.
Visor lock system (VLS) that reduces the risk of accidental opening in the event of an accident.
Double-D retention system.
SHARE System ready.
Weight: 1,325 grams (50 grams) in size MS (ECE2205).
Homologation: DOT, ECE 22.05.
Note: Helmet ships with Clear shield, other hues sold separately.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye-brows and across the largest portion of the back of the head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.