UNI Air Filter - Clamp On Style

UNI Air Filter - Clamp On Style
UNI Air Filter - Clamp On Style

$17.99

Description See Also: 5 Reviews 5 Questions Fitment Part Numbers
Item #UUN0005

Read More
5 Reviews
4.0 out of 5 stars
5 Star   3 4 Star   1 3 Star   0 2 Star   0 1 Star   1
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Crf50dad Verified Purchaser
Filter DOES NOT fit on O.E.M carburetor!

Filter diameter is to large for carburetor. When trying to tighten the filter it gets squeezed off the back of the carburetor. Very disappointed.

turbo333 Verified Purchaser
Huntingburg, IN 47542, USA
Durability 4/5 Ease of Installation 5/5 Performance 4/5 Style 4/5
Good filter

Good filter.easy to install and service with dirty

burnzy Top 50 Contributor
salina ks
Durability 5/5 Ease of Installation 5/5 Performance 5/5 Style 4/5
UNI Filter

Good filter, Super easy to install. Looks great (not as good as the red UNI filters, but still good), and filters the dirt, snow, mud, watever nature throws at it with ease. Makes my 50 have that traditional "breathing" sound that u hear with most hopped up 50s. A+++

hondaguy919 Top 25 Contributor
stillwater, ok
Fantastic!

This is a good filter. It fits well and looks trick also. Great replacement filter.

IRideRed
Highland Park, IL
A good choice

I bought this air filter for my honda 50 and it definitely made a difference as to the power. The engine was getting much more air. Only downsides are that is doesn't seem very secure on the carb and is gets dirty very fast.

5 Questions
Answered:   5
Not Yet:   0
PortA
Location: Port Aransas texas
Q: Love Uni air filter on sons 2016 Honda crf50..which jet do I need?.it bogs a bit. Live at sea level and ride up to 1500' thanks!!?
1 year 1 month ago
MotoSportExpert
MotoSport Staff Expert
1 year 1 month ago
A: Due to the variations that may come into effect when tuning an engine (i.e. pipes, intake, altitude, cams, displacement, standard or high compression pistons, etc.) we CANNOT offer jetting recommendations.
motodad
Location: WA
Q: Do I need to re jet?
Over 3 years ago
I have a total stock bike. Want to replace factory air box with UNI clamp on filter. Will I need to re jet? If so what size?
MotoSportExpert
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: With this filter installed you will more than likely need to re-jet. The jetting will depend on what elevation the bike is ridden at as jetting at sea level will need to be richer than if the bike is ridden at 4000 ft. On a stock CRF50 depending on where and when it is ridden I would possibly recommend staying with the stock air filter and airbox. It doesn't get contaminated as quickly with dirt and is much more protected in wet conditions.
kuhby11
Top 500 Contributor Top 250 Contributor
Location: northeast, TN
Q: What are the dimensions on this??
Over 3 years ago
MotoSportExpert
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: The dimensions of these filters will vary depending on what model it is selected for. If you are looking for a specific size pod filter, please call us and we can can can check price and availability for you.
kx85racer
Location: Waterford, CT
Q: Will this fit?
Over 7 years ago
hello i have a 2007 crf50 honda its stock will this filter fit my bike and where does it clamp on
Drewski
MotoSport Staff
Over 6 years ago Location: P+RTLAND
A: Yes it will fit,

It clamps onto the intake side of the carb.
MotoMoo2
MotoSport Staff Expert
Over 6 years ago Location: Portland
A: This filter clamps directly to the stock carburetor.
hotshot
Q: Is there a part that goes in place of the vac hose that is still connected to the tranny case after the filter is instaled?
Over 7 years ago
There is a vacuum hose connected the original air box to the tranny case.It is a hose with what I think is an" oil katch box" in the middle, and it looks like a vacuum hose. mabey a tranny cooling vac.type vac-?!?!?
james718
MotoSport Staff Expert
Over 7 years ago Location: USA
A: If you're referring to the XR/CRF50, that hose is actually a crank case breather hose. when you eliminate the stock air intake, with this clamp on style air filter, you will want to get a Crankcase Vent Filter from K&N and attach it to the hose. Unfortunately we do not stock this item as we have scaled back our 50 parts. You can find this filter at any local dealership or try contacting two brothers racing.
bradlyp
Over 7 years ago
A: that hose is for taking the oil vapors inside the crankcase and burning them with the air/fuel mixture
1-5 of 5
Fitment
See all bikes that this part fits...
See Fitments
# Part Numbers
Product Variant Manufacturer Part #
UNI Air Filter - Clamp On Style UP-4112
Report an Error