TM Designworks Universal Roller Kit

TM Designworks Universal Roller Kit
TM Designworks Universal Roller Kit

$19.99

Select your bike to see if this chain roller fits
Description See Also: 8 Reviews 13 Questions Fitment Part Numbers
Item #TDW0012

Read More
8 Reviews
3.4 out of 5 stars
5 Star   4 4 Star   0 3 Star   2 2 Star   0 1 Star   3
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
xr250r
wallaby county
Durability 3/5 Ease of Installation 1/5 Performance 3/5 Style 5/5
BUYER BEWARE!!!!!!!!!!!!!!!

no fault to motosport, i think there awesome......... ok 1st they advertise them in mm. well which way width or diameter...... well its diameter after calling tm designworks.....finally there is no way in hlle that this would fit
way to small.. i would probably need a 42mm which they dont carry.but product looks awesome very good bearings... for performance and durablity i gave it an averaage cause i think it would been good...

Scuba101
Wv
Durability 1/5 Ease of Installation 2/5 Performance 1/5 Style 2/5
Say Universal?

Said it fit my crf and it doesn't. I learned to pay attention to the "universal " part and never order one again. I couldn't give it review under durability obviously. It did cost me a weekend of riding because it didn't fit!

KMMTNMAN Verified Purchaser
Ridgecrest Ca
Durability 3/5 Ease of Installation 3/5 Performance 3/5 Style 3/5
Universal roller.

I bought this to put on a 2003 warrior 350, The motosport website said this fits your warrior 350. It did not fit. Come to find out, Motosport lists universal parts as fitting everything. Buyer Beware. Make sure your bike uses this type roller.

HonestAbe Top 500 Contributor Verified Purchaser
Fort Worth, TX, USA
Durability 5/5 Ease of Installation 5/5 Performance 5/5 Style 5/5
Great Roller

I installed this roller on a 2009 YZ125. I am certain the quality exceeds OEM and the price is considerably less. Use the shims to center the roller to your chain and forget about it.

snake Verified Purchaser
Durability 3/5 Ease of Installation 1/5 Performance 3/5 Style 5/5
Did not fit 2002 ktm exc race four stroke 250

this chain roller did not fit . i could have lived with it being to tall 33mm not 30mm but it was also to wide and did not fit between tabs on frame . one thing i did find out because of this is that the bearings in these rollers are removable and are a common size (check # on bearing ) the one in mine were the same as the bearings for skateboards . i bought a set of 8 for 17$ with a roll rating of abec7 which is a rating for bearings it goes from 1 to 9 ( 9 being the best ) the bearings in the ™ design where abec3 .i will see if these skateboard bearing hold up they are also doubled sealed to keep dirt out

DMoney357ak47
Millington MD.
Durability 5/5 Ease of Installation 5/5 Performance 5/5 Style 5/5
Good backordered for a long time

The part is great the only problem was it was backordered for such a long time but it got here and got put on before the good weather now ready to ride

muscle
anadarko okla
Filled the gap

overall fit not bad a bit smaller but no problem asked for black and got blue oh well chain surface a bit out of round but shouldnt affect the kind of riding i do

DDDD741 Top 500 Contributor
Fargo ND
Great replacement

Very nice replacement! Easy install.

13 Questions
Answered:   12
Not Yet:   1
Tyler
Q: Which size would fit a 2008 Yamaha raptor 350?
Over 5 months ago
MotoSportExpert1
Top 500 Contributor Top 250 Contributor
4 months 5 days ago
A: Yes this would fit your 2008 Yamaha Raptor 350, Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct roller for your ATV
Bill
Q: What is id/ in other words what size bolt needed?
Over 5 months ago
It says, universal, will fit my 1980 cr250r... mine requires a m10 bolt
malcolm
Q: Will this fit a 1985 cr500?
1 year 9 months ago
the site says this will fit but not to sure ?? many thanks
MotoSportExpert
MotoSport Staff Expert
1 year 8 months ago
A: Yes TM Designworks does show this Universal Roller Kit as fitting your 1985 Honda cr500.
Scott
Location: Louisiana, MO, USA
Q: How do i know what size to get the 33 or the 39mm?
2 years 3 months ago
MotoSportExpert
MotoSport Staff Expert
2 years 3 months ago
A: You can measure your stock roller or give us a call with the Year/Make/Model of your bike at 888-676-8853.
snake
2 years 2 months ago
A: use a micrometer to measure old roller you also need to measure the width of the roller not just the height then call motosport and have them check the width of the new one
Prizmblue
Q: What is the width?
2 years 5 months ago
I'm trying to locate a replacement for My rear chain guide (by the rear sprocket) on a 2006 TE 450 Husqvarna. Which is thinner than the two front upper and lower rollers!
MotoSportExpert
Expert MotoSport Staff
2 years 5 months ago
A: It is universal width for any 420, 428, 520 chain.
The OD (33/39mm) and specialty hardware is what is important for an application usually.
broppolo13
Location: sc
Q: Will it fit my 2008 ktm 250 sx? Does it come with the bolt to fit it to the frame?
2 years 6 months ago
MotoSportExpert
Top 1 Contributor
2 years 6 months ago
A: No. The item comes as pictured - Roller only.

If you need a replacement bolt, look under the OEM parts for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Wildman
Location: Massachusetts
Q: I have a 2005 Yamaha YFZ 450 and I need a bottom roller but don't know what size to get. Can anyone help me out?
2 years 6 months ago
MotoSportExpert
Top 1 Contributor
2 years 6 months ago
A: You will have to measure the stock roller there. TM Design does not list the stock size. But they have a upper and lower kit available.
garrettcrf250r
Location: Arizona
Q: How long should the stock chain rollers last?
Over 7 years ago
I have a 2007 crf250r and I am a novice mx rider. I dont know how to tell if there is wear or not. But normally how long should the stock chain rollers last? I have 50 hours on my bike. Thanks for any help
MotoMoo2
MotoSport Staff Expert
Over 7 years ago Location: Portland
A: There is not a measurement of riding time to indicate ware. Visual inspection is the best way to determine if it is warn out.
mxracer8872
Top 250 Contributor
Location: Glen Gardner, NJ
Q: Specific models...?
Over 7 years ago
I have a 2008 CRF 450R. Which TM Designworks upper and lower rollers will fit?
RCB255
Expert MotoSport Staff
Over 7 years ago Location: Tualatin, Or
A: Your bike will show 2 sizes 33mm and 39mm.

The 33mm is the upper and the 39mm is the lower roller
zalo
Q: Dimensions?
Over 7 years ago
Could you give dimensions? diameter, length, ......
JesseC
MotoSport Staff
Over 7 years ago Location: Tualatin
A: these are available in 33mm and 39mm diameter
1-10 of 13
Fitment
See all bikes that this part fits...
See Fitments
# Part Numbers
Product Variant Manufacturer Part #
Black / 33mm UCR-33M-BK
Black / 39mm UCR-39M-BK
Blue / 33mm UCR-33M-BU
Red / 33mm UCR-33M-RD
Red / 39mm UCR-39M-RD
Report an Error