This light bar is very nice quality, and great chrome job. I dislike the fact that you must adjust the lights and tighten before mounting the bar to the bike and you have to use an offset wrench to get the proper tightness. They also could include wire to either splice into existing wire for turn signals or replace the existing wire. Once the wire is run, you have to use an open end wrench to tighten the lights and do to them being inset, this is really fun. Once on the bike and finished looks and works great. I bought the show chrome universal accessory switch to use instead of the cheap one they give you with the light bar. Again Motosport knocked it out of the park at their end.
Show Chrome Driving Light Kit - Elliptical
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
For those of you that are mounting on VT1300CT
Interstate. You will need to Buy Longer Mounting
Bolts to Drop Below OEM Turn Signals, and extra
Spacer. This will allow You to Keep OEM Lights
and, Lights That Come With Kit. It LOOKS GREAT !!!
Outstanding chrome, great fitment and easy installation. Thanks again!
I had these lights installed at a Honda Dealer. The on/off switch they give you is not the best in the world. It's a little switch that you have to drill a hole in side case to install. I wanted my lights on full time so I threw the switch away. If you install these on a VTX 1300 with a Memphis Fats shield you will need the adapter kit no matter what the factory tells you. I found out the hard way. They are great lights, shine bright and have a great look on the bike.
There have been no questions asked about the Show Chrome Driving Light Kit - Elliptical.