The all new EXO-C110 is Scorpion's next generation take on a classic helmet. The EXO-C110 combines subtle modern lines, an advanced ventilation system to cool the head during long rides, a dual EPS liner, and an improved SpeedView sun visor mechanism which provides a premium feel, all while maintaining the classic half helmet look and fit.
Advanced Polycarbonate Shell: Developed exclusively by Scorpion, the industry-leading polycarbonate shell is engineered to minimize weight and disperse impact.
SpeedView SunVisor: Retractable interchangeable internal sun visor. Choose the up or down position with the flip of the switch. Features the exclusive EverClear anti-fog coating on all surfaces.
KwikWick II Liner Fabric: KwikWick II anti-microbial fabric keeps you cool and dry in warm weather, warm in cool weather. Liner is easily removable and washable.
Aero-tuned ventilation system.
Low profile peak visor.
Pockets for speakers / communication device.
Meets or Exceeds: DOT approved.
Note: Sold with light smoke retractable sun visor, other visor options also available and sold separately.
Write a Review
Enter to Win $500
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!
A: Yes, the sun visor is 100% UVA & UVB protected.
1-2 of 2
SCORPION HELMETSADULT HELMETS
20.9 - 21.3in (53.1 - 54.1cm)
6-5/8 - 6-3/4
21.7 - 22in (55.1 - 55.9cm)
6-7/8 - 7
22.4 - 22.8in (56.9 - 57.9cm)
7-1/8 - 7-1/4
23.2 - 23.6in (58.9 - 59.9cm)
7-3/8 - 7-1/2
24 - 24.4in (61.0 - 62.0cm)
7-5/8 - 7-3/4
24.8 - 25.2in (63.0 - 64.0cm)
7-7/8 - 8
25.6 - 26in (65.0 - 66.0cm)
18.9 - 19.3in (48.0 - 49.0cm)
19.8 - 20.2in (50.3 - 51.3cm)
20.5 - 20.9in (52.1 - 53.1cm)
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.