awesome style, very comfortable, high quality construction, maybe just a little small, you might want to order a size up
- 5 Reviews
- Ask a Question
- Sizing Chart
- Premium Polycarbonate shell.
- Impact absorbing EPS.
- Cooling ventilation system.
- Tooless changeable Mouthvent with washable sponge filter.
- Replaceable and washable KwickWick2 Liner set (including crown piece and cheek pads.
- Removable and washable Mudguard protecting from injury.
- Air inflatable cheek pad with AIR PUMP - AirFit.
- Aerotuned design.
- Certified DOT / ECE R22-05.
Its a awsome helmet but you might want to order 1 or 2 size bigger otherwise its a great helmet
Some other sites gave these helmets sketchy reviews because they said they ran small. I wear a size M in a SixSixOne helmet and this helmet fit perfectly (Medium as well). I also wear Oakley MX Proven OTG goggles and they fit no problem.
They look great, feel great, and you cannot beat the price!
First time out... Everyone thought I was wearing a Shoei helmet!!
Absolutely awesome graphics. Looks like a $350 helmet with the shaped moulding. I measured my head with a tape and ordered according to the size chart, and it does run a little tight, but I think it will conform well this year. I'm sticking with the size. Much more vented than my old HJC.
(41 year old woods rider)
Its very comfortable and if fits great you can pump up the helmet to make it tighter or let air out very awesome design of helmet.
There have been no questions asked about the Scorpion VX-34 Oil Helmet.
|Size||Head Circumference||Hat Size|
|X-Small||20.9 - 21.3in (53.1 - 54.1cm)||6-5/8 - 6-3/4|
|Small||21.7 - 22in (55.1 - 55.9cm)||6-7/8 - 7|
|Medium||22.4 - 22.8in (56.9 - 57.9cm)||7-1/8 - 7-1/4|
|Large||23.2 - 23.6in (58.9 - 59.9cm)||7-3/8 - 7-1/2|
|X-Large||24 - 24.4in (61.0 - 62.0cm)||7-5/8 - 7-3/4|
|2X-Large||24.8 - 25.2in (63.0 - 64.0cm)||7-7/8 - 8|
|3X-Large||25.6 - 26in (65.0 - 66.0cm)||8-1/8- 8-1/4|
|Small||18.9 - 19.3in (48.0 - 49.0cm)|
|Medium||19.8 - 20.2in (50.3 - 51.3cm)|
|Large||20.5 - 20.9in (52.1 - 53.1cm)|
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
- Check that the helmet inner lining fits snugly all around your head.
- Check that the top pad presses on the top of your head.
- Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
- Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
- Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.