Expensive in light of their short life span--wear out very quickly and aren't all that good to begin with. I experienced boot slippage from the start and obviously it got worse as they wore. It was approximately 6 months and it got so bad I replaced them with a different brand
- 14 Reviews
- 4 Questions
The 2.3 Platform footpegs feature completely replaceable and customizable cleats to ensure you are getting the most out of your footpegs. The 2.3 Platforms come with all necessary mounting hardware and the standard height cleats.
- Two-piece platform system with 3 levels of adjustment.
- 7075 hard anodized billet aluminum replaceable cleats.
- Precision investment cast stainless steel platform base.
- Exclusive Pro Taper traction arch cleat design.
- All hardware included.
- Note: Comes with standard height only (-5 mm and +5 mm cleats sold separately as Pro Taper Footpeg Cleat Kit).
I installed these on my CR125 and they have better grip than the original pegs. I have a better and safer feeling with my foot on the peg.
I installed them very easily.
These footpegs are sweet. I like that the pads are interchangeable
have been riding with these footpegs for half a season now and pretty happy with them super comfy being so wide still nice and sharp and for the size of them are very lite good buy
Went with the -5mm seems to give me a better position on the bike. pegs are also wider which is great in terms of comfort!
these are worth the money. are 3x the width of the stock pegs and are ten times more comfy if you are thinking about getting these pegs .. buy them you will not be very pleased
I have used other aftermarket footpegs before and these Pro Taper pegs are amazing. Super wide platform helps you find your footing. Their is plenty of grip to keep you from slipping off in nasty conditions.
These pegs are great when new but do not last long for off road. Im already on my 3rd pair of replacement cleats an at $70 for new cleats these are to expensive to keep on my bike
2010 CRF450R Vet Pro ,These pegs are great, I have never ran aftermarket pegs so I do not have alot to gauge off. After 20+ years of riding I finally splurged and purchased aftermarket pegs. I have only about three rides on them but they feel excellent, alot more room to move around and they keep your feet where you want them. I do wish they were a little more pointed but I have not slipped off the pegs.
Great Product comfortable when over shooting a jump. I added the 4mm extension to get me a little higher. Great Product. The only issue I have is the price little expensive.
These pegs are nice but a little to much money. they are holding up nicely work great in mud and I haven't filled with dirt or any thing like that. id buy them again if i needed to get pegs for a new bike
I purchased these pegs for my 2008 RMZ 450 and they're awesome. They are very aggressive, your boots will feel as if they are glued to the pegs. I only worry about being attacked by them when I wreck.
These pegs are great until you have to ride in mud. They fill up with mud right away and all traction is lost. The teeth are also so agressive that they ruined my brand new boots in a couple of weeks.
Look and fit great but have not had them out yet due to weather. Pegs are 2.25 x 3.25 inches. Sit at the same height as stock and about 1/4 inch closer to the shifter. Slight arch to the pegs. Price is too high IMO.