Pro Taper Evo Handlebars - Oversize 1-1/8

Magnesium
Magnesium

$80.99 $89.99
10% Off - Save $9.00

Description See Also: 62 Reviews 42 Questions Sizing Chart
Item #PTP0011

Read More
62 Reviews
4.9 out of 5 stars
5 Star   57 4 Star   6 3 Star   0 2 Star   1 1 Star   0
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Stretch Verified Purchaser
Minneapolis, MN, USA
Pro Taper bars on FZ-09

I have put over three hundred miles on these bars and love them. The stock handle bars have a strange angle to them that made my wrists sore after an hour of riding. That problem is completely gone. The Pro Taper bars are very well made, good looking finish and a perfect fit.I have the Carmichael bend that is a bit shorter then stock and feels much nicer. I am over six foot tall and my arms are at a more comfortable angle now. Money very well spent.

Tommy Verified Purchaser
Mass
Good strong bars. Very good price

Bought these after my stock bars bent. Needed to order bar mounts as well because they are oversized and took 5 minutes to install and the next day the bike landed straight from the air onto the bar and it didnt bend so great purchase

RacinMason Verified Purchaser
Fargo, ND, USA
Pro Taper evo bars

Owned many sets of bars and these are by far the best.They look great too. Can't go wrong with Pro Taper or Motorsport!

JMO140 Top 1000 Contributor Verified Purchaser
Madison
Best purchase

Great feel

Londy Top 1000 Contributor
Visalia, CA, USA
Love Pro Taper!!

I love these bars! Cr high is my bend. they feel great! Super tough bar. I've had two hard crashes. one high side and one endo. my triple clamps got twisted up but these bars stayed true. I love the flex they provide off of those big landings. You can really feel it! Definitely will buy these again. You should too if you want some great bars. Run Pro Taper!!!

Kelly231 Top 1000 Contributor Verified Purchaser
Houston
Best bars period !

Have been using Pro Tapers since 93' . Just a tougher bar !

TrailRider Top 500 Contributor Verified Purchaser
SO.CA.
Pro Taper Fat Bars (Carmichael)

These bars are sweet! The bend is perfect for me and look cool too. Time will tell how strong they are but they seem to be very well made.
I say go on and get you some and ride hard.

experiencedrider Verified Purchaser
Hawaii, USA
Drops em down

good replacement if you want to lower the hight of your grips. i have the under bar stabilizer on my 08 yz250 2 smoke. 2 inch rise and stock renthals were kind of high. these dropped them back down about 3/4 inch. i like the flex too-seems like it has less vibration

Fast44 Verified Purchaser
Fast44

Great bars and a little more forgiving than my old Renthals. Look trick too!

TheThrill Verified Purchaser
Park Hills, MO
Tough Bars

I bought the CR High bend and I really like them. Fell over several times and bounced the bar ends off some trees...not bent. Great bars and great service from Motosport.com

PetieB
These Handlebars are highly recommended for mx

To replace the awesome stock Renthal bars was tough to justify for me at first but...These reduce fatigue, are safer if ever your chin slams down towards the crossbar, and the one time I overshot the "Dinner Table" Jump at Broome-Tioga by 20' (I'll never do that again) the leatt neckbrace kept the impact from slamming my chin where the missing crossbar benefit has me rate the 5/5 Pro-Taper bars which literally saved the seasons title in the final round. dudes-they are the best and worth every penny...some flex the first ride seems weird but the arm pump is like almost dropped. if you compete you need these in my opinion for a huge advantage...

jdawg
Maui, Hawaii, USA
Very satisfied with this product

theyre really light. pretty strong and durable. unless you go down really hard of course.

Pro Taper Evo Handlebars - Oversize 1-1/8
Rynomite
Yuma, AZ, USA
They Work!!

I used to have the contour bars but had bent those. I bought these about a year ago and I can honestly say, they are a good bar. I've had a couple pretty good wrecks on them and they are still as straight as the day I put them on my bike. Definitely recommend them!

Chris
Awesome Bars

I got these bars a couple months ago and they are great! they are very sturdy and wont bend or brake easily. i had a pretty bad get off i went down so hard that the bars rotated in the triples but did not bend or brake. I highly recommend them!

motoaddict Verified Purchaser
Pennsylvania
Strong bars

Decent bars held up a lot of crashes but the only down side is they scratch ridiculously easy. I had a lot of scratches just mounting the bars and using tie downs is going to be a nightmare.

Beast Verified Purchaser
Grand Falls, NB, Canada
AMAZING!!!

I THINK IM IN LOVE WITH THEM!! They fit perfect! There easy to put on! There perfect fit!

Blumpkin Verified Purchaser
NorCal
Behind Bars

Overall, these are really good bars. I mean, they're handlebars after all, no moving parts, no different than any other fat bar, right? ... Yes, and No. The Pro Taper's are among the strongest Fat Bars you can get, it take A LOT to bend or break them. The thing that keeps me from giving 5 stars is the price. Other than that, you can get them in nearly any bend you want, they last, and look great.
Cheers!

NElliott164 Verified Purchaser
Dixfield, ME, USA
Great Bars!

I purchased these bars for my 2003 CR250 with the CR high bend option. They are very comfortable and quick and easy to set up. The only con to them is they scratch very easily when strapping your bike in the truck.

ColoradoKawi
Colorado Springs, CO
Great Bars

Love these bars... Replaced the Renthal bars on my KX450 to help with some flex, not as stiff as the Renthal bars. I had Pro Taper on my other bike YZ450 and loved the bars, so when I bought the KX I thought I would keep the Renthal bars on them. I ride MX/Hare Scrambles and felt the Renthals were just too stiff for my comfort. FYI I had many crashes on my YZ and the bars never bent, cant go wrong with these bars.

MyNameIsChris Top 1000 Contributor Verified Purchaser
Houston
Comfort and Style

There was a noticble improvement in the way I rode my 2010 YZ450F. I love the way these bars fit my style.

See 20 More Reviews
42 Questions
Answered:   41
Not Yet:   1
Bill
Location: Austin, TX, USA
Q: Cross Bar?
1 month 10 days ago
My 2016 KX250F stock bars currently have a (clamped) crossbar, Will the stock crossbar clamps work with these bars?
Buck
Q: My son races and looking at these but not sure which ones please help?
1 month 26 days ago
MotoSportExpert
MotoSport Staff Expert
1 month 17 days ago
A: Handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar he would like. I would recommend looking at the Size Chart for the measurement dimensions of each of the handlebar bends. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Brap101
Location: CT
Q: What is the difference between these and the contour bar, if both taper down to a 7/8 control diameter?
2 months 10 days ago
MotoSportExpert
Expert MotoSport Staff
2 months 9 days ago
A: The EVO handlebar is stronger. Utilizing a computer profiled 4mm wall design and is up to 25% lighter than other bars yet up to 45% stronger. Made from 4mm, proprietary, 7000 series aluminum alloy for superior tensile and yield strength
Best balance between fatigue life, impact strength and impact absorbing flex. The Contour is Made from 5mm, proprietary, 2000 series T6 aluminum alloy.

EVO
The EVO handlebar utilizes a computer profiled 4mm wall design and is up to 25% lighter than other bars yet up to 45% stronger. Motocross Action magazine says of the EVO bar: ”The amount of flex Pro Tapers provide takes the jolting edge off of rough tracks and lessens hand fatigue.” and Transworld Motocross magazine says: “We don’t care what kind of bike you ride, the EVO will improve the comfort.”

Made from 4mm, proprietary, 7000 series aluminum alloy for superior tensile and yield strength
Best balance between fatigue life, impact strength and impact absorbing flex
High tech, stress relieved, shot peen and anodized finish for unmatched durability
Independent lab tests show that the EVO handlebars outlast every other handlebar on the market in fatigue life
Epoxy inner coating resists corrosion
Left side knurling provides maximum grip traction
Chemically applied cut lines and alignment grid are scratch and peel resistant
End plugs help keep the elements out of the handlebar tubing and aid in longer grip life
Weighs only 1.4 pounds (640 grams)
Pad sold separately
The EVO bar is Pro Taper’s top of the line bar without a crossbar. Oversize diameter handlebars, without cross bars, were invented, and patented, by Pro Taper. This design allows the bar to flex more and absorb impacts better than other bars. This offers the rider more comfort and less fatigue without sacrificing bar strength.

Contour
Made from 5mm, proprietary, 2000 series T6 aluminum alloy for superior tensile and yield strength
Most affordable balance between bar fatigue life, impact strength and impact absorbing flex
High tech, stress relieved, shot peen and anodized finish for unmatched durability
Left side knurling provides maximum grip traction
Chemically applied cut lines and alignment grid are scratch and peel resistant
End plugs help keep the elements out of the handlebar tubing and aid in longer grip life
Comes with bar pad
Weighs only 1.55 pounds (720 grams) w/o pad
The Contour bar is Pro Taper’s best selling handlebar. Oversize diameter handlebars, without cross bars,were invented, and patented, by Pro Taper. This design allows the bar to flex more and absorb impacts better than other bars. This offers the rider more comfort and less fatigue without sacrificing bar strength. The Contour is the most affordable way to get your hands on the most sought after bar design in the world. The Contour handlebar utilizes a computer profiled 5mm wall design and is up to 20% lighter than other bars yet up to 40% stronger.
Nate
Q: Does it include a bar pad?
4 months 28 days ago
MotoSportExpert
MotoSport Staff Expert
4 months 24 days ago
A: Yes, bar pad included.
keagan
Q: What kind of bend and clamps do i need?
Over 6 months ago
I have a 2014 crf 125 big wheel. I was wondering what kind of bend/clamps I would need
MotoSportExpert
Expert MotoSport Staff
Over 5 months ago
A: Handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar you would like. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Carson
Q: What bend and will they fit?
Over 8 months ago
I have a 2010 YZ250F, would I need new clamps and I prefer low bend bars which choice of bend would be the best?
MotoSportExpert
MotoSport Staff Expert
Over 8 months ago
A: Handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar you would like. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Requires the use of oversized 1-1/8" handlebar clamps (sold separately).
moses450
Q: I have a 2016 kx 450f Would i need to get bigger clamps to install the bars?
Over 9 months ago
2016 kx 450f do i need to get clamps with the evo bars to install them ?
MotoSportExpert
Expert MotoSport Staff
Over 9 months ago
A: Yes you would need oversized 1-1/8" bar mounts to run these Pro Taper Evo Handlebars on your 2016 Kawasaki KX450F.
sheed
Q: What type of bars should i get for my kx100?
Over 10 months ago
MotoSportExpert
MotoSport Staff Expert
Over 10 months ago
A: Handlebar (bend) is all about personal preference. It would be hard for me to recommend a specific bar you would like. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends. Keep in mind the oversized bars would require oversized bar clamps to mount them on your KX100. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Adam
Q: Are the end plugs easily removable?
Over 11 months ago
These were installed on my bike by the previous owner, I'm wanting to add hand guards to it so I just need to know if the end plugs are easily removable
MotoSportExpert
Expert MotoSport Staff
Over 10 months ago
A: Yes the end plugs are easily removable.
austin2122
Q: Will this fit a 09 wr250f? and will it fit fine with protaper twist throttle and brush guards?
Over 11 months ago
MotoSportExpert
MotoSport Staff Expert
Over 11 months ago
A: Yes the Pro Taper Evo Handlebars should work great on your 2009 Yamaha WR250F. You would need Oversize 1-1/8 bar mounts. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
1-10 of 42