Pro Taper Contour Handlebars - Oversized 1-1/8

$74.99
$67.49 (10% off)
4.90 5 107
4.90 out of 5 stars
 
Pro Taper Contour Handlebars - Oversized 1-1/8
Pro Taper Contour Handlebars - Oversized 1-1/8
  • Description
  • Reviews (107)
  • Q&A (59)
  • Sizing Chart
  • Fitment

In 1991, Pro Taper introduced the 1-1/8-inch Taperwall handlebar and the industry hasn't been the same since. The Corona, CA based company expanded its product line to include clutches, sprockets and grips, among others, but Pro Taper never turned its back on what landed them in the motocross world.

The Pro Taper Contour Handlebar - Oversized is a best seller and made with the same quality as its Standard 7/8-inch Pro Taper brother, it's just, well, oversized! Check out the features that come with this solid beast and you'll understand why it's a must-have on the race course by riders like Nate Adams, Levi Sherwood and Robbie Maddison.

  • Made with aerospace-grade aluminum with 5 mm wall tubing.
  • Chemically applied scratch and peel-resistant "un-sticker" graphics.
  • Knurled clutch side for secure grip hold.
  • 1/4" cut guides for precise width modification.
  • Includes high-density molded pad.
  • Great value for bar / pad combo.
  • Bend and color for every application.
  • Note: Pro Taper Contour Handlebars require the use of 1-1/8 inch oversized handlebar clamps (sold separately).
4.9 out of 5 stars (107)
4.9 out of 5 stars
5 star   96
4 star   12
3 star   2
2 star   1
1 star   1
See Terms and Conditions
1-10 of 107
Overall 5 out of 5 stars
Location: Chicago, IL, USA
Nomad
Pro Taper Contour Handlebars

I recently installed this on my 2008 Suzuki DR650. The bar looks good and strong. I've only dropped the bike 3 times on soft muddy trails, so it didn't affect the bar at all. I expect it to survive drops that are much worse.

Overall 5 out of 5 stars
Verified Purchaser
Location: California, USA
HondaRider
Cant go wrong

Although Renthal I would buy in a heartbeat, these pro taper bars tie when comparing because of the price. They hold up very well, haven't had an issue. If you r ballin on a budge, these are the way to go

Overall 5 out of 5 stars
Verified Purchaser
Blake
Good

Nice handlebars with good width. Been holding up well and have not bent yet.

Overall 5 out of 5 stars
Location: Louisiana, USA
LoganW
Best Bars Out There!

These are amazing handle bars, bought the atv mid bend and they feel, look, and perform great, will buy again if they ever bend

Overall 5 out of 5 stars
yfzguy450
Great Bars

Amazing bars, they hold up like no other. My steering stem bent before my bars did

Overall 5 out of 5 stars
Top 1000 Contributor
Location: Houston
Kelly231
Best Bars Period !

Have been using Pro Tapers over 20 years. They takes spills that other bars can't . That simple .

Overall 5 out of 5 stars
Top 1000 Contributor
Location: Jonesville, NC 28642, USA
hondarider3
Great bars

Great bars have on both my bikes much better then stock worth the money

Overall 5 out of 5 stars
Verified Purchaser
Location: Hamptonville, NC
hondarider
Great bars

Best bars for the money have a pair for both of my bikes

Overall 5 out of 5 stars
Verified Purchaser
HONDACRF450R
Better than I expected

Works good and makes my CRF450R handle much better.

Overall 5 out of 5 stars
Top 1000 Contributor Verified Purchaser
Location: Walkerton IN
maher462
Great bars

I have been running pro taper for years and absolutely love them. Have hit these pretty hard on the ground and they usually with stand it. But every bar bends at some point in time.

1-10 of 107
Total Questions (59)
Questions with answers:
  59
Questions without answers:
0
SamK Location: London, UK
Motoman65
1-10 of 59
mxtrey 10 days 21 hours ago
Will these fit on a crf250r?
MotoSport Staff Expert
5 days 2 hours ago
MotoSportExpert
Pro Taper Contour Handlebars require the use of 1-1/8 inch oversized handlebar clamps (sold separately). If you have oversized clamps on your Honda CRF250R these bars will fit.
shawn 1 month 16 days ago Location: Whittier, CA, USA
Protaper bars?
just bought some henry reed bend contour protapers online was wondering if they would fit my 2015 kx450 the stock renthals look slim
Expert MotoSport Staff
29 days ago
MotoSportExpert
You would need to determine what size bars and clamps you have as your 2015 Kawasaki kx450f could have come with either 7/8" or 1-1/8". If the bar is the same diameter from the control area down through the clamps this Pro Taper Contour Handlebar would not work.
SamK 1 month 25 days ago Location: London, UK
Will this fit my 2006 pw80?
I was wondering if these bars would fit my 2006 pw80 and which bend i should get that would be suitable for a pw80?
MotoSport Staff Expert
1 month 23 days ago
MotoSportExpert
No these Pro Taper Contour Handlebars - Oversized 1-1/8 would not fit your 2006 Yamaha PW80.
Domr 3 months 23 days ago Location: New Jersey, USA
I have a 1999 ktm exc 250 and i just bought these bars, CR mid, i was wondering if i need bigger clamps or will the stock ones fit?
Expert MotoSport Staff
3 months 23 days ago
MotoSportExpert
These Oversized 1-1/8" handlebars would not work with the stock 7/8" mounts. You would need oversized bar mounts (sold separately). Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Motoman65 4 months 15 days ago
06 Yamaha ttr125L??
I'm 5'10" and have an 06 Yamaha ttr125L it's an amazing you to have fun on to ride what do you think would be the be the best for me I do like to rip on it a lot thanks in advance
MotoSport Staff Expert
4 months 15 days ago
MotoSportExpert
Handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar you would like. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
JoshW Over 5 months ago Location: California
Ttr 250?
I'm 5 7 want some wider bars then my stock ones maybe slightly taller what would be recommended and are there any other parts I need
Expert MotoSport Staff
Over 5 months ago
MotoSportExpert
Unfortunately we do not have stock handlebar dimensions for every bike. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends and comparing them to the dimensions of your current bars. The Pro Taper Contour Handlebars require the use of 1-1/8 inch oversized handlebar clamps (sold separately). Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
kevin Over 10 months ago
I have a 2013 WR 250 R I am 6 feet tall and I ride trails I usually like to stand what bars would be comfortable for me?
MotoSport Staff Expert
Over 10 months ago
MotoSportExpert
Really handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar you would like. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends.
jessie Over 10 months ago Location: chatsworth
Which bend is the closest to the oem bars for a 2012 yz450f ?
MotoSport Staff Expert
Over 10 months ago
MotoSportExpert
Unfortunately we do not have handlebar specs for your ATV. Using the sizing cart to the right of the Q&A tab you can match up the closest bar with measurements from your stock bars.
Hunter Over 10 months ago Location: Arkansas
Can I use the stock clamps on my bike with these bars?
1999 rm125
Expert MotoSport Staff
Over 10 months ago
MotoSportExpert
no, you would need the universal 1-1/8" bar mounts for your 1999 Suzuki RM125.
Bobby56 Over 11 months ago Location: GA
2012 RM85?
I bought this new for my son and looking to get some ProTaper SE bars. Which bend of the SE will be close to the stock bar except for taller?
Top 1 Contributor
Over 11 months ago
MotoSportExpert
You can find a reference of the OEM bars for your RM85 on Renthal's website:

http://www.renthal.com/shop/fit-my-bike

Renthal also makes the fat bars that are similar to the Contours that you can purchase.
1-10 of 59
Pro Taper Handlebars

EVO
BendWidthHeightRiseClamp AreaSweepControl Area
Carmichael 31.5in (80cm) 3.0in (7.7cm) 1.6in (4cm) 7.7in (19.5cm) 2.2in (5.5cm) 7.1in (18cm)
Henry/Reed 31.5in (80cm) 3.6in (9.2cm) 2.6in (6.6cm) 8.1in (20.6cm) 2.2in (5.7cm) 7.1in (18cm)
Pastrana MX/RM LOW 31.5in (80cm) 2.9in (7.4cm) 2.2in (5.6cm) 8.0in (20.3cm) 2.2in (5.5cm) 7.1in (18cm)
Windham/RM MID 31.5in (80cm) 3.9in (9.9cm) 2.9in (7.4cm) 8.6in (21.9cm) 2.1in (5.3cm) 7.1in (18cm)
Factory Suzuki/KTM Stock 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.2cm) 8.5in (21.7cm) 1.9in (4.7cm) 7.1in (18cm)
Woods HIGH 31.5in (80cm) 3.8in (9.7cm) 2.7in (6,9cm) 8.3in (21.1cm) 2.4in (6.1cm) 7.1in (18cm)
CR HIGH 31.5in (80cm) 3.7in (9.5cm) 2.8in (7.1cm) 8.0in (20.4cm) 2.4in (6cm) 7.1in (18cm)
YZ HIGH 31.5in (80cm) 3.3in (8.4cm) 2.2in (5.6cm) 8.0in (20.2cm) 2.0in (5.2cm) 7.1in (18cm)
Adventure 31.7in (80.4cm) 4.8in (12.3cm) 3.5in (9cm) 4.3in (10.9cm) 3.2in (8.1cm) 7.9in (20cm)
Adventure HIGH 31.7in (80.4cm) 6.9in (17.4cm) 5.6in (14.1cm) 4.3in (10.9cm) 3.2in (8.1cm) 7.5in (19cm)

Contour
BendWidthHeightRiseClamp AreaSweepControl Area
Carmichael 31.5in (80cm) 3.0in (7.7cm) 1.4in (3.6cm) 7.7in (19.5cm) 2.2in (5.5cm) 7.1in (18cm)
Henry/Reed 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.1cm) 8.1in (20.6cm) 2.2in (5.7cm) 7.1in (18cm)
Pastrana FMX 31.5in (80cm) 4.8in (12.1cm) 2.8in (7cm) 9.3in (23.6cm) 2.2in (5.5cm) 7.5in (19cm)
Pastrana MX/RM LOW 31.5in (80cm) 2.9in (7.4cm) 2.1in (5.4cm) 8.0in (20.3cm) 2.2in (5.5cm) 7.1in (18cm)
Windham/RM MID 31.5in (80cm) 3.9in (9.9cm) 2.8in (7cm) 8.6in (21.9cm) 2.1in (5.3cm) 7.1in (18cm)
Factory Suzuki/KTM Stock 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.2cm) 8.5in (21.7cm) 1.9in (4.7cm) 7.9in (20cm)
Woods LOW 31.5in (80cm) 2.8in (7.1cm) 2.6in (6.6cm) 8.3in (21.1cm) 2.4in (6cm) 7.7in (19.5cm)
Woods HIGH 31.5in (80cm) 3.7in (9.5cm) 2.6in (6.6cm) 8.3in (21.1cm) 2.2in (5.7cm) 7.1in (18cm)
KX HIGH 31.5in (80cm) 4.3in (10.8cm) 2.8in (7cm) 9.3in (23.6cm) 2.2in (5.6cm) 7.9in (20cm)
CR MID 31.5in (80cm) 3.2in (8.2cm) 2.2in (5.6cm) 9.1in (23cm) 2.2in (5.7cm) 7.9in (20cm)
CR HIGH 31.5in (80cm) 3.7in (9.5cm) 2.6in (6.7cm) 8.0in (20.4cm) 2.4in (6cm) 7.1in (18cm)
YZ HIGH 31.5in (80cm) 3.3in (8.4cm) 2.1in (5.3cm) 8.0in (20.2cm) 2.0in (5.2cm) 7.1in (18cm)
Universal LOW 31.5in (80cm) 2.8in (7.1cm) 1.5in (3.8cm) 8.8in (22.3cm) 2.2in (5.5cm) 7.9in (20cm)
ATV BendsWidthHeightRiseClamp AreaSweepControl Area
ATV LOW 32.0in (81.3cm) 3.7in (9.5cm) 2.6in (6.7cm) 9.0in (22.9cm) 2.4in (6cm) 7.9in (20cm)
ATV MID 32.0in (81.3cm) 4.3in (10.8cm) 2.8in (7cm) 9.3in (23.6cm) 2.2in (5.6cm) 7.9in (20cm)
ATV HIGH 32.0in (81.3cm) 4.8in (12.1cm) 2.8in (7cm) 9.3in (23.6cm) 2.2in (5.5cm) 7.9in (20cm)
Raptor 32.0in (81.3cm) 5.6in (14.3cm) 4.5in (11.5cm) 9.3in (23.6cm) 3.4in (8.7cm) 7.9in (20cm)
Mini Bike BendsWidthHeightRiseClamp AreaSweepControl Area
Mini LOW 30.5in (77.5cm) 3.1in (8cm) 2.1in (5.3cm) 8.5in (21.6cm) 2.0in (5cm) 7.9in (20cm)
Mini HIGH 30.5in (77.5cm) 4.1in (10.5cm) 3.0in (7.6cm) 8.7in (22.1cm) 2.0in (5.2cm) 7.9in (20cm)

SEVEN EIGHTHS
BendWidthHeightRiseClamp AreaSweepControl Area
Carmichael 31.5in (80cm) 3.0in (7.7cm) 1.6in (4cm) 7.4in (18.8cm) 2.2in (5.6cm) 8.1in (20.6cm)
Henry/Reed 31.5in (80cm) 3.6in (9.2cm) 2.4in (6cm) 8.9in (22.5cm) 2.2in (5.7cm) 7.3in (18.6cm)
Pastrana MX/RM LOW 31.5in (80cm) 2.9in (7.4cm) 2.1in (5.4cm) 9.0in (22.8cm) 2.2in (5.5cm) 7.4in (18.9cm)
Windham/RM MID 31.5in (80cm) 3.9in (9.9cm) 2.7in (6,9cm) 9.6in (24.3cm) 2.1in (5.4cm) 7.4in (18.9cm)
Factory Suz/KTM Stock 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.1cm) 9.2in (23.3cm) 1.9in (4.7cm) 7.5in (19cm)
CR LOW 31.5in (80cm) 2.8in (7.1cm) 2.2in (5.5cm) 9.1in (23.1cm) 2.7in (6.8cm) 7.7in (19.5cm)
CR MID 31.5in (80cm) 3.2in (8.2cm) 2.2in (5.6cm) 9.1in (23cm) 2.2in (5.7cm) 7.7in (19.5cm)
CR HIGH 31.5in (80cm) 3.7in (9.5cm) 2.6in (6.7cm) 9.2in (23.3cm) 2.4in (6cm) 7.3in (18.6cm)
KX LOW 31.5in (80cm) 2.8in (7.1cm) 2.1in (5.4cm) 9.1in (23.1cm) 2.4in (6cm) 7.7in (19.5cm)
KX HIGH 31.5in (80cm) 4.3in (10.8cm) 2.8in (7cm) 9.2in (23.3cm) 2.2in (5.6cm) 7.2in (18.4cm)
RM HIGH 31.5in (80cm) 3.2in (8.2cm) 2.1in (5.3cm) 8.8in (22.3cm) 2.9in (7.3cm) 7.7in (19.5cm)
YZ LOW 31.5in (80cm) 2.6in (6.7cm) 1.9in (4.8cm) 8.6in (21.9cm) 2.8in (7cm) 7.7in (19.5cm)
YZ HIGH 31.5in (80cm) 3.3in (8.4cm) 2.1in (5.3cm) 8.7in (22.2cm) 2.0in (5.2cm) 7.7in (19.5cm)
ATV BendsWidthHeightRiseClamp AreaSweepControl Area
ATV LOW 32.0in (81.3cm) 5.5in (14cm) 3.5in (8.8cm) 9.0in (22.8cm) 3.3in (8.4cm) 8.1in (20.6cm)
ATV MID 32.0in (81.3cm) 5.9in (15cm) 3.7in (9.3cm) 9.3in (23.7cm) 3.0in (7.6cm) 8.1in (20.6cm)
ATV HIGH 32.0in (81.3cm) 6.3in (16cm) 4.1in (10.4cm) 9.3in (23.6cm) 3.9in (10cm) 7.8in (19.9cm)
Raptor 30.3in (77cm) 5.6in (14.3cm) 4.5in (11.5cm) 6.3in (16.1cm) 3.4in (8.7cm) 8.1in (20.6cm)
Trials BendsWidthHeightRiseClamp AreaSweepControl Area
Trials LOW 32.5in (82.5cm) 3.9in (9.9cm) 2.1in (5.4cm) 6.6in (16.7cm) 1.9in (4.9cm) 8.1in (20.6cm)
Trials MID 32.1in (81.5cm) 4.2in (10.6cm) 3.0in (7.7cm) 6.8in (17.3cm) 2.0in (5cm) 7.9in (20cm)
Trials HIGH 32.1in (81.5cm) 4.4in (11.3cm) 3.3in (8.4cm) 6.8in (17.3cm) 1.9in (4.9cm) 8.1in (20.6cm)
Mini Bike BendsWidthHeightRiseClamp AreaSweepControl Area
Honda Mini 28.7in (73.0cm) 4.6in (11.7cm) 3.5in (8.9cm) 6.5in (16.6cm) 2.0in (5cm) 7.7in (19.5cm)
Kawasaki Mini 28.7in (73.0cm) 3.7in (9.4cm) 3.2in (8.1cm) 6.9in (17.6cm) 2.0in (5cm) 7.3in (18.6cm)
Suzuki Mini 28.7in (73.0cm) 4.0in (10.2cm) 3.1in (8cm) 6.8in (17.2cm) 2.0in (5cm) 7.3in (18.6cm)
Yamaha Mini 28.7in (73.0cm) 3.9in (9.9cm) 2.8in (7cm) 6.3in (16cm) 2.3in (5.8cm) 7.3in (18.6cm)
Schoolboy Low 28.1in (71.5cm) 3.1in (7.8cm) 2.0in (5.1cm) 5.4in (13.7cm) 1.9in (4.7cm) 7.7in (19.5cm)
Schoolboy High 28.1in (71.5cm) 3.5in (8.8cm) 2.4in (6.1cm) 5.7in (14.4cm) 1.8in (4.5cm) 7.7in (19.5cm)
Schoolboy Pro 29.3in (74.5cm) 3.1in (8cm) 2.8in (7.2cm) 7.9in (20cm) 2.0in (5.2cm) 7.9in (20cm)
XR50 28.5in (72.4cm) 6.7in (17.1cm) 6.0in (15.2cm) 7.2in (18.4cm) 1.7in (4.4cm) 6.3in (16.1cm)
KTM50 25.5in (64.8cm) 3.1in (8cm) 2.8in (7.2cm) 6.2in (15.7cm) 1.7in (4.4cm) 6.6in (16.7cm)
KLX110 / DR-Z110 / CRF110 31.5in (80cm) 5.6in (14.3cm) 4.8in (12.3cm) 7.2in (18.4cm) 1.7in (4.4cm) 7.9in (20cm)

FUZION
BendWidthHeightRiseClamp AreaSweepControl Area
Carmichael 31.5in (80cm) 2.9in (7.3cm) 1.4in (3.6cm) 7.7in (19.5cm) 2.2in (5.5cm) 8.3in (21cm)
Henry/Reed 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.1cm) 8.1in (20.6cm) 2.2in (5.7cm) 7.2in (18.2cm)
Windham/RM MID 31.5in (80cm) 3.9in (9.9cm) 2.8in (7cm) 8.6in (21.9cm) 2.1in (5.3cm) 7.1in (18cm)
CR HIGH 31.5in (80cm) 3.7in (9.5cm) 2.6in (6.7cm) 8.0in (20.4cm) 2.4in (6cm) 7.1in (18cm)
YZ HIGH 31.5in (80cm) 3.3in (8.4cm) 2.1in (5.3cm) 8.0in (20.2cm) 2.0in (5.2cm) 7.5in (19cm)
SX Race 31.5in (80cm) 3.4in (8.7cm) 2.1in (5.45cm) 8.5in (21.6cm) 2.1in (5.4cm) 7.7in (19.5cm)

METAL MULISHA
BendWidthHeightPullback
Metal Mulisha MX (Henry/Reed) 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.1cm)
Deegan FMX (KX HI) 31.5in (80cm) 4.3in (10.8cm) 2.8in (7cm)
Twitch FMX (Pastrana FMX) 31.5in (80cm) 4.8in (12.1cm) 2.8in (7cm)