I have had this for about a year now, my old oem one was just worn to pieces on my 07 kx250f. I put this on, and it works like a charm!
Pro Circuit Hot Start Connector
- 10 Reviews
- Ask a Question
- Available in red.
Fit nice on my 2008 rmz 250. Easy install. Took some time to screw it in because of limited space. But so far awsome
Great product. you can tell a big difference from the plastic fitting. Yeah its a little pricy but definitely worth it.
Good solid product. Think price is a little high but it works so I'm happy
Very clean expensive nut but worth it. No more breaking or cross treading the plastic nut
The stock plastic connector is junk. Got this in and I wont have a problem with it again.
***2006 YZ450f**** Wasnt sure if it at first it would fit my carb but no problem. Easy to install in a small amount of time. Had to replace my stock one because of stripped plastic threads but this alleviates all headaches and keeps the system sealed from outside dirt and unwanted hot start use. Must buy for the next time your working around the carb.
first of all its not plastic, so thats a plus, plus a tighter fit in the threads and the cable end, so hopefully a lot less water intrusion! I thought pricing could have been a little less....but with PC stamped on it....well...
Pro Circuit with another great product!! This is a must have for anyone who has had problems with their hot start. Much better design than the plastic OEM version that strips out and lets water and condensation into the carb causing the plunger to seize up.
It works exactly as described. The PC Hot Start Connector is way better than the stock piece. Make sure that you use a little anti-seize thread lubricant when installing it...and don't over tighten it.
There have been no questions asked about the Pro Circuit Hot Start Connector.