works as advertised
Motion Pro Fork Oil Level Gauge
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
I bought this to set the air gap on my KTM WP 4860 forks. I think this is a much better way to service these forks than just adding the prescribed ounces of fluid. Using the syringe is somewhat messy as the excess fluid also does not completely stay contained but, again, it gets the job done for a reasonable price.
Sure fire way of measuring the air gap on forks and ensures identical fluid levels in your forks
was just as described
Easy to use and works better than a homemade set up.
Sorry folks this is not worth the money! One
Time use and the syringe is cracked the length
Of the tube. It never got abused, I'm guessing it came that way?
This product takes the guess work out of figuring how much fluid you need in each fork. You set this to the factory air chamber length and you are set! Only gave it a 4/5 because the numbers are a bit hard to see without light but overall works wonders
This a good tool it dose what they not one complaint
So easy to keep proper oil level now. Now it is exactly the same every time.
Worked as designed. Beat using the vacuum pump.
makes it so easy anyone can do it takes all the guest work out of changing oil all you need is your service manual this oil level gauge and some good fork oil
If your going to be changing your own fork seals this is a must have. Or changing fork oil
this is a must have if you are the kind of guy who likes working on your own forks. great and very easy to use
Light, easy to store, and feels solid. The parts would be easy to replace and everything works as it should. Numbers are easy to read.
I didn't really need this tool. Honda specifies a volume of oil for their dual stage forks, not a measurement like this tool is designed for. I used it to do an older set of forks and it was very helpful. The plunger did start to leak a little, which is why the rating is four stars.
You need this tool if you work on your own forks. When my fork seals go out I replace all the oil in my forks and this tool is great at what it is built for.
I have not used it yet, but it appears to be well made.
This is a great product and designed very well but it is overkill for twin chamber forks like I have. Twin chambers base oil height on the volume you add to the outer chamber, not the height of the oil in the fork. Still, it is a great product for adding and drawing out a specific amount of oil when making adjustments to the volume in the field. As in, I can draw out exactly 10cc from each leg at the track to soften the forks a bit.
Ok product. A little pricely for the simple quality. Easier to use and more accurate than any of the manual methods I used before.