I've went through three different clutch perches to get this cable to be semi-tight, it seems to be roughly about 2 inches too long
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Great product and shipped quick
Worked great on my quad!
the exact match part. came right on time. now I will need to order two more cables as I know they will be right for my bike.
The cable was easy to install on my 2005 Yamaha FZ6. Adjustment was easy once I realized how to adjust the slack in the cable before going to the lever adjustment. Worlds of difference over my stock cable. Would buy for other bikes, if I had other bikes...
The product is great and was the perfect fit. I couldn't find anything online either in forums or on YouTube for my specific bike so it took me a little longer than it probably should have to replace the cable. I was able to figure it out however and everything works perfect. If I ever have to change the clutch cable out again it will literally take 10 minutes now that I know what I'm doing.
Well made and easy install
It was so easy to install, make for super easy install, GOT IT A DAY EARLIER THAN IT SAID! Very impressed, works perfect, definitely recommend.
Clean. Durable. Packaged well. Would recommend
Got er on the ole Kx250f and she's been ripping hard since, works super well and got me right back on the track
Much better then my old stock one seems to be working great so far
Was supposed to be exact fit for my 06 rm 125. Cable fit in side case and lever but was to long even after fully adjusted out.
Excellent replacement for stock cable. On my 13'rmz450,
It was about a 15-20 minute job, mostly due to the parts
removed for access. ( number plate, lever guard,
2 factory zip ties, left side radiator and louvre..)
The rubber protection boots aren't as robust as stock,
but still well made.
Installed on a 2001 banshee. Holds up to dragracing. Over all good product.
This cable meets or exceeds the quality of OEM and costs less.
The description was spot on, the price was more than reasonable and Motosport was quick in their delivery as well. Installation wasn't all to bad and now the clutch movement is smooth as butter and resistance has gone down. Excellent product.
'04 Yamaha FZ6 25k miles.
So I wrote a review previously and I was pretty angry when I did. I have since talked with Larry in the motion pro warranty department about this cable breaking and he said he was gonna look into it. He was very professional gave me his contact info and listened to my story. He sent me a new cable at no charge and that means a lot to me. I'm sure that I just suffered a fluke with the second one breaking and am super pumped with the great customer service. I will try motion pro again and would tell others that they will not be left out in The cold if they have a problem with motion pro.
Better than original equip, easy install
Fast service and quality parts.
Dirt Bike: 1-888-676-8853
The engine. You'll need to remove a few parts to access
The cable route. Number plate, left side radiator, a few wire ties, and the bolt securing the cable to the case.