LA Sleeve Cylinder Sleeve Standard Bore

LA Sleeve Cylinder Sleeve Standard Bore
LA Sleeve Cylinder Sleeve Standard Bore

$61.99 - $260.99

Select your bike to see if this cylinder sleeve fits
  • Description
  • Write a Review
  • 15 Questions
  • Fitment
Description Item #LSL0001
  • Cylinder sleeve made from chrome-moly alloy.
  • Outside diameter precision centerless ground.
  • Ports cut to precision dimensions and shapes for ease of installation and port match-up.
  • Inside diameter must be bored and honed to size pistons after installation.

Read More
Write a Review

Read More
15 Questions
Answered:   15
Not Yet:   0
Chop
Q: I have a 2001 cr 125 that has I scratched up sleeve?
3 months 23 days ago
Should I re sleeve?
MotoSportExpert
MotoSport Staff Expert
3 months 21 days ago
A: Personally I would recommend replacing the cylinder or having your cylinder repaired/bored and re-plated by Millennium Technologies.

http://www.mt-llc.com/

http://www.motosport.com/oem-parts/part-number/12110-KZ4-L10?mmysource=honda;cr125;2001&partgroup=cylinder-head
Colton
Q: Just making sure this cylinder sleeve, this fits my 1990 rm80? Thanks?
Over 11 months ago
Would need to machine for New wiseco piston, oversize .04 (already have the piston from you guys otherwise would go with standard
MotoSportExpert
Expert MotoSport Staff
Over 11 months ago
A: Yes this LA Sleeve Cylinder Sleeve Standard Bore Fits your 1990 Suzuki RM80. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct sleeve for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Jason
Location: Taiwan
Q: Does it fit 1995 Yamaha WR250z ?
1 year 2 months ago
I had my engine seized and can't find a OEM part or any aftermarket alternative, should I buy this to fix it ? What is the size of piston that go with it? And do you ship it to Taiwan? Thank you so much.
MotoSportExpert
MotoSport Staff Expert
1 year 2 months ago
A: All products sold on Motosport.com are for US models only. We unfortunately do not have product fitment for non-us models. If you can verify that the WR250Z cylinder is the same as the US model 1995 WR250 than yes this would fit.
jack
Location: Australia
Q: Can u re-sleeve a cr125?
1 year 3 months ago
I have a 2000 CR125 the inside of the cylinder is worn should i have it re-sleeved bored or what?
MotoSportExpert
Expert MotoSport Staff
1 year 3 months ago
A: Personally I would get a new cylinder http://www.motosport.com/dirtbike/oem-parts/honda/2000/cr125/cylinder-head/cylinder-a/12110-kz4-l10
Or have your cylinder bored and re-plated. For that I use Millennium Technologies (920) 893-5595
http://www.mt-llc.com/contact_us.php

Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
brady2468
Q: Will a wiseco stock bore high compression piston fit?
1 year 4 months ago
I have a 09 yz250f and i blew the top end and the cylinder is shot! and i can not find just a cylinder for without having to buy the kit so will this sleeve work?
MotoSportExpert
Top 1 Contributor
1 year 4 months ago
A: You will have to machine the cylinder and press the sleeve in the cylinder. Once done, you have to prep the sleeve to accept the piston. You would be better off purchasing a new OEM cylinder.

http://www.motosport.com/dirtbike/oem-parts
Jeffer
Q: Cilinder sleeve for a standar cilinder of Yz 450F 2007?
1 year 6 months ago
Hello. Need repair a standard cylinder, which has in its half burrs. I wonder if installing this item and rectifying the cylinder can be an alternative.
MotoSportExpert
Expert MotoSport Staff
1 year 6 months ago
A: Yes, the LA Sleeve Cylinder Sleeve Standard Bore is available for your 2007 Yamaha YZ450F. Just be sure to correctly select the Year/Make/Model of your ATV before ordering so we can be sure to send you the correct sleeve for your ATV. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
alex
Location: Brooklyn, NY, USA
Q: Would ths sleeve fit my yamaha 2007 yz85 cylinder?
1 year 9 months ago
MotoSportExpert
MotoSport Staff Expert
1 year 9 months ago
A: Yes, it will fit your 2007 YZ85. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct Sleeve for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
JonSparre
Location: Denmark
Q: Do I need to bore this if I buy a standard piston?
2 years 3 months ago
1. I will hone it of cause, but I dont have tools for boring it. Can I just hone it? 2. Will a standard size piston be the one to fit this? If not which one shall I get? 3. Is the sleeve just pressed into toppart or shall it be frezzed/heated? Thanks Jon
MotoSportRyanT
Expert MotoSport Staff
2 years 3 months ago Location: Portland, OR, USA
A: The sleeve will need to be bored even for the standard piston size. All sleeves are supplied with a semi-finish bore. The piston will not fit until you have bored the sleeve to the correct piston clearance. Hone the bore to the clearance recommended by the piston manufacturer.

Cylinder sleeves are typically installed into the cylinder using an "interference fit" (sometimes referred to as "press fit"). This means the size of the block or cylinder bore is smaller than the outside diameter of the sleeve. The sleeve is "pressed" into the cylinder and the size variance holds the sleeve in place.

According to LA Sleeve, You should not have to freeze or heat the sleeve for installation. More information on this can be found here: http://www.lasleeve.com/technical
Zach
Location: Penetang
Q: My kx 125 needs to be resleeved?
2 years 4 months ago
I was wondering if this would fit my bike as I bored my cylinder over 1m mmaking it 55. I was wondering if this is the sleeve that would bring it back to a stock 54mm? Any help would be greatly appreciated
MotoSportExpert
Top 1 Contributor
1 year 9 months ago
A: The stock cylinder has to be bored to fit the sleeve. The sleeve will be the stock bore size and has to be prep'ed and honed after installation into the cylinder.

LA sleeve has a very good FAQ for you:

http://www.lasleeve.com/technical
Drew
Q: I was wondering if/when this part could be available for purchase.?
2 years 7 months ago
I was hoping to rebuild my wife's 230 engine as a Christmas gift and I'm having great difficulty finding anyone who has a sleeve in stock. http://www.motosport.com/dirtbike/LA-SLEEVE-CYLINDER-SLEEVE-STANDARD-BORE Thanks
MotoSportExpert
Top 1 Contributor
1 year 9 months ago
A: Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct LA Sleeve Cylinder Sleeve Standard Bore for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
1-10 of 15

Read More
Fitment
See bike s that Fit this Part

Read More