For orders of $49.00 or more
Orders over $49.00 will receive free 3-day express shipping. This is a residential delivery service, with deliveries Monday through Friday from 9:00am to 8:00pm.
GMAX is extremely excited to introduce the all new GM76X helmet series. The all new GM76X GMAX helmet is an evolution to their industry leading GM46X helmet. The GM76X Helmet is loaded with features and designs normally found on others' highly priced helmets, but delivered to you at a true GMAX competitive value.
Large eyeport that accepts large goggles.
Roomier jaw area for increased comfort.
Eyeport trim has integrated "roost deflector".
Larger bottom opening that allows for increased comfort when putting on and removing the helmet.
Industry leading 17 vents! Maximum air flow is achieved through shell / Styrofoam and comfort liner vents.
New material Styrofoam inserts are located between the cheek pads and the shell; this increases comfort and helps with outside sound reduction.
Plush, removable and washable interior allows for adjustable fit and comfort that is second to none; tool-less removal for easy cleaning.
New cheek pad design for comfort and reduction of outside noise.
Removable and washable cheek pads allow for custom fitting with optional sized cheek pads.
Specially shaped ear pockets and comfort liner for maximum comfort.
High flow venting.
Newly designed mouth vent allows for quick and easy removal from the front of the helmet.
D-ring and a retention snap that secures excess chin strap length.
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.