Solid hour meter. Been on my bike for almsot 20 hours, no problems. Just make sure you clean the frame where you stick it really, really well. I didn't and the double sided tape didn't work well. I had to use a 3M command strip to hold it on. Works perfect now, but still have the safety zip tie on it.
- 14 Reviews
- 1 Question
The C1 is the innovative engine hour meter by GET, and the only one to work without any connection to the motorbike. Using the time-saving Velcro brand hook-and-loop tape included in the kit, the C1 fits to the bike in just a few seconds. This device detects the engine by interpreting and identifying the wave frequencies that flow through the surface on which it is mounted. The C1 is fully waterproof (IP68) and has been designed to work even under the toughest conditions like off-road applications. The C1 has two engine hour meters and logs the total running time (no reset available). The partial engine hour meter can be reset pressing the select button in a certain procedure. The built-in battery allows for a three-year lifespan.
- Easy-to-read display.
- Small size and light weight.
- Total engine hour meter up to 999.9 hours (reset not available).
- Partial engine hour meter (resettable).
- No need for coil connection cable.
- IP68 resistant plastic case.
- Lifetime: 3 years.
- Velcro brand hook-and-loop tape included.
- Built-in battery.
Great idea but it seems to be reading the vibration from my truck when I haul the bike in the bed of the pickup. Looks good, easy to install, just not quite an accurate hour meter if you are going to be hauling your bike in the back of your truck. May work as designed with a trailer.
Works great! Installation was super easy and required nothing except slapping it on the bike! Works like a charm and stays on through all the abuse!
Hour meter tends to log hours when my bike is on the trailer making it pretty useless. I secure my bike with risk racing mounts. This may not be an issue if you secure your bike with straps as they don't transmit as many vibrations to the chassis.
No monkeying around with wiring, put it anywhere safe on the bike (it has double sided tape on it already), zip tie it and forget about it. I even dropped it onto the floor installing it and no issues. Comes on a few seconds after you start the machine, works great.
Easy to install and has no wires, it works from vibration.
I got for my son's kx65 new complete rebuild on motor. It is a great tool to have on bike to keep track of oil changes and top end rebuilds, and you know exact time on your motor. Also is wireless is a plus as well, all round a great product and would recommend to anybody and would put on another bike of mine when I do a fresh rebuild again!
super simple install. no wires. be sure to read the instructions on the item and keep them handy. other than that, just counting away the hours without issue!
Great product and very durable. Mounted in minutes. No wires to deal with. Has holes for safety wire also. GET makes great products.
easiest part to install on a dirt bike, clean area and stick on. Has total hours and resettable hour meter for oil changes.
Completely worth the money. User friendly. Love it.....
Easy to install/no wires, just stuck the adhesive backing to the frame. Only drawback is that when the battery is depleted, you have to replace it. I have abut 30 hours on the meter, but s far it has worked flawlessly.
Works and easy to install, what more can you ask.
This installed very easily, it even has slots you can run a zip tie or safety wire through for extra security. The adhesive stuck to my frame really well, and there are no wires to attach. A little more money than other hour meters, but worth it.