I put these in my 13 kx250f. Do not recommend. Clutch was still slipping after installing these. I then bought the Hinson clutch and installed them and couldn't believe how much better they were. Still running strong today and have a lot of hours on them.
Driven Complete Performance Clutch Kit
- 43 Reviews
- 13 Questions
- Designed with performance and durability in mind.
- Top quality clutch kit that offers excellent wear resistance and optimal clutch feel.
- Friction plates feature a special break in coating to ensure even break in and helps prevent glazing.
- High quality paper based material that is more durable than cork.
- High quality steel drive plates included.
- Spring kit is up to 25% stiffer than stock for a stronger clutch hold.
Easy on the wallet and it does its job. No instructions, but they are friction plates, clutch plates, and springs. Simple install if you can turn a wrench. No issues with them over the past 6 hours of riding. Went with these over the more expensive options as I plan on putting in a Rekluse Torq-drive Manual clutch when I rebuild the top end. Figured for $50 these would be a cheap temporary fix for the rest of the summer/fall season. Replaced my out of spec worn OEM plates which were slipping on the cheap.
Comes with everything you need to replace a bad clutch. Don't forget to adjust your cable after installation.
delivery service was outstanding received parts three days after order. the clutch installed easily and functioned great. front end comes up shifting into third gear.
I have a 2005 yz450f, the inner diameter was to small on the plates. The washer that goes in the back would not fit in it, causing the plates to be pushed out too far.
Good price / performance ratio. I've run them for a couple weeks and no issues so far.
I race supermoto and use these plates, never been a issue and go through 1 a year on each bike I have
Good kit. Cant beat it for the price. Clutch feel is good and grabby. I cant say for sure if the "performance" kit is any better than the regular kit but im brutal on my clutch so i sprung for the performance kit. I have 3 rides on it so far and clutch feel is only improving, especially after it broke in a little. Just make sure to change your tranny oil every other ride. 2000 cr250
The clutch plates didnt work right of way but the when i rid it for half an hour worked great
The springs did not fit, they were the wrong diameter and would not fit in my pressure plate. Not worth returning, ordering different springs now.
Was in the atv in no time
This kit contains everything needed to re-clutch your atv/bike. The springs are 20% stronger than OEM. This system is alot stronger and more durable than stock! Wont use anything else.
Great value, easy install and stiffer springs.
Soaked in Amsoil for 24hrs. Easy instal. Good price. So far no issues.
I had the stock clutches on it, they sucked. These definitely brought it to life with a smoother clutch pull and a more grab.
I installed this clutch on my sons rm 85 it only took 30 minutes. after install took the bike out and it ripped like never before. also now you can starter it in gear and not have to finding neutral every time. great quality clutches and very fast shipping thanks to moto sport.
Goes together like stock. Doesnt slip. Hardly any clutch fade. Lasts the whole race season.
Installed on a 09 yz450f and it held up great no matter what I threw at it on the track. made the bike come alive ! pulls the wheel up in every gear no problem.
Overall the clutch is good. Only problem I had was one of the metal plates was not cut properly so it didn't fit. I used one of my old metal plates, so all is good.
They work great and was easy to install.
The price was right.