DEI Exhaust Wrap

DEI Exhaust Wrap
DEI Exhaust Wrap

$12.95 - $25.95

Description See Also: 30 Reviews 9 Questions
Item #DEI0004

Read More
30 Reviews
4.7 out of 5 stars
5 Star   19 4 Star   8 3 Star   3 2 Star   2 1 Star   0
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Quadracer08 Verified Purchaser
Exhaust Wrap

Keeps the pipe on my yfz450 too a decent temp so it dosent burn my leg anymore. Definetely recommend!

Hopalong Verified Purchaser
Bur Oak IN
It's a wrap

Worked well and was easily put on.

Robilli195x Verified Purchaser
Didn't work for me

I got the 2 inch wide wrap to use on my FMF mega bomb header. It could be because of the odd shape of the header but the wrap wouldn't stay tight and eventually unraveled while riding.

wyatt Verified Purchaser
Folsom, CA, USA

Works great to cover up the ugly chrome mid pipe on my 05 R6. Works so well I don't have to worry about a possible burnt ankle after a ride.

Jimmyjames Verified Purchaser
Phoenix, AZ, USA
DEI Exhaust wrap

As usual my order was received extremely fast . this product was a must for my 1982 GS 1100 looks awesome and easy to install. one set back is that DEI sells the ties separate. I feel it should be sold as a set wraps and ties together. still great product.. THX motosport.

Hfgtt457 Verified Purchaser
Bellingham wa

The 2 inch doesn't wrap tight bends on exhaust easily. I ended up buying the 1 inch instead. Don't forget stainless wireties or stainless wire to hold it in place.

lildiesel
Ewa Beach, HI
WORKS GREAT...LOOKS AMAZING

A must have for a hot running exhaust! Keeps the heat off your legs and in the pipe. Also, adds a nice finishing touch to that exhaust and over time your exhaust starts to look old, just wrap it up, and good as new!

twelch3 Top 500 Contributor Verified Purchaser
Long Beach,MS
Keep it cool!

This wrap is easy to install on header pipes & keeps the hot ir where it's supposed to be. In the pipe.

grumpygizm0 Verified Purchaser
Houston, TX
Works Great

I put this on my four stroke yz426f. It helps a LOT with keeping your leg from roasting, and also while idling I've noticed lower temperature readings most likely because its not radiating as much heat under the right radiator. Makes it a little quieter on stock head pipe but not too much. Overall it works great, would buy again. Also make sure you buy some clamps. Note: Does not have to be DEI clamps, auto clams work good too.

Head pipe wrapped
caferacer Verified Purchaser

Excellent purchase. Makes your exhaust look brand new and sleek. Easy to use.

MGTFRMR
Japan
Easy to use

shipped really fast and easy to use. i put this on a 4-2-1 bike headder with a buddy in about 30 min. little messy, but i would buy again

Fort Drum, NY
Works good

I have full Dasa exhaust and my header was hot with my leg next to it so i bought this DEI wrap in the titanium and it has help keep most of the heat away from my leg and made riding much more better. Installing this is a little tidious so i highly suggest having someone help you because you have to keep the wrap tight around the headers.

DoctorSkip
Marysville, OH
Keep it Cool

This product will definitely keep the heat off your plastics. I wrapped my header with this excellent material which was so easy to install. Just the thing for the job

MotoBliss
Blairsville,PA
Excellent header wrap

Meso
Modesto, Calif

I bought this wrap for my Dual Sport, it has a header and I applied just like the instructions said and it also wants you to buy some spray, anyway it still haets up and smells everytime I ride, my leg still feels the heat, can't tell if it helps my motor or not, I'm taking it off., and getting a heat shield welded on.

tommy454
loxahatchee fl

holding up to this point,seems to be a quality product.

hayder Top 250 Contributor
Phoenix, AZ
More than i expected

works great covered alot more than i expected it too. the only thing that would be better is if it came with a couple ties to tie it down

bryan9983
Redding CA
450R

works great, a must to help keep that 450R cool, easy to put on and the silicone spray is a must when using this wrap,to help keep it in good condition..

RatBikeRider
Philly
Great Tape

Great Tape! I just bought it to wrap a set of pipes on a 79' Suzuki GS750 - Rat Bike. The wrap looks great! It set the pipes off perfectly. The only bad thing I would say about the kit is that there wasn't enough tape for my application and I had to order more which was inconvienent. But once I got the order and finished the pipes I forgot all about it.

Take your time wrapping the pipes if your doing it yourself. A few extra minutes of wrapping will pay off in the end.

rollingscott
Memphis, TN
DEI Exhaust Wrap

easily installed - smokes quite a bit for a few miles - but worth it

See 10 More Reviews
9 Questions
Answered:   9
Not Yet:   0
Pete123
Location: Powys, UK
Q: Can I wash it?
Over 8 months ago
Say I'm washing my bike and there's loads of mud on it, Can I just hose it down and scrub it like a normal exhaust? And will the water and mud damage it?
MotoSportExpert
MotoSport Staff Expert
Over 8 months ago
A: No the water and mud will not damage it.
Zach
Q: Exhaust leak?
2 years 11 months ago
I have a exhaust leak where my FMF slip on meets the header pipe. I've used a few inexpensive products that just melted away and leaked. could I use this product to seal the gap between my header and slip on or will it just burn off?
MotoSportExpert
MotoSport Staff
2 years 11 months ago Location: Portland, OR, USA
A: This is designed to wrap the header and create a heat barrier. It will not melt off of the exhaust. It is not designed to seal exhaust leaks so, while it may work, it cannot be guaranteed. Your best bet may be to take the header and muffler to an exhaust shop to see if they can be re-flared for a better fit.
Lambo
Q: Is it only used to prevent leaks?
Over 6 years ago
DirkDiggler
Top 500 Contributor
Over 6 years ago Location: Orange, CA
A: It is used to keep the heat from the header from disipating out. In return some people believe you get better performance.

I could see it working well from keeping the header from heating up the carb & rear shock resi.

If not put on correctly it will quicky look bad and is messy.
PBlart
Q: Is there any protection difference between the 1 inch and 2 inch wraps?
Over 7 years ago
james718
MotoSport Staff Expert
Over 7 years ago Location: Portland, OR
A: No difference. I'd think about how tight the bends are in the exhaust you plan to wrap. Than purchase accordingly.
jakemx
Location: Mtl, Qc
Q: Applications???
Over 7 years ago
I have a slight exhaust leak where the pipe meets the cylinder, can I tightly wrap it around the end of the pipe (where the o-rings are) to stop the leak and again, where the pipe meets the silencer??
Drewski
MotoSport Staff
Over 7 years ago Location: P+RTLAND
A: You could, it's not the best fix but it will work for a little bit but personally I would replace those o-rings first and see if that solves the leak.
gRISIUs12
Q: Were do you Put This?
Over 7 years ago
Drewski
MotoSport Staff
Over 7 years ago Location: Portland, OR
A: You wrap it around your exhaust pipes. It pretty much acts as a heat shield.
rmrider2011
Q: You can use this wrap on two stroke pipes right??
Over 7 years ago
james718
MotoSport Staff Expert
Over 7 years ago
A: Sure you can. That's what its made for.
yfz450yz250f
Q: Silicone spray?
Over 7 years ago
do you need to put a silicone spray on it??
james718
Expert MotoSport Staff
Over 7 years ago
A: I've never heard of that.
chris94
Q: What is the heat maxium?
Over 8 years ago
and would it be good on galvanize pipe
harleydave
MotoSport Staff Expert
Over 8 years ago
A: Sorry, DEI does'nt provide that info. You can go to www.designengineering.com and ask that question under their "contact us"
1-9 of 9