Solid tool from BikeMaster. Unlike other feeler gauges this one has a nice little bend on the end that makes it easier to check your valve clearence on your four strokes. The bend is not so acute that it hinders use in measuring other things but is just enought to make it quite easy to accurately measure your valve clearence without having to manually bend your straight feeler gauge (which makes it hard to feel the clearance). The reasonable price makes this a must have tool for anyone who does their own work on four stroke top ends.
BikeMaster 12-Blade Combination Tappet And Feeler Gauge Set
- 10 Reviews
- Ask a Question
- Blades: dual marked 0.203mm/0.008" to 0.660mm/0.026".
- 4" long taper blades, hardened and polished.
- Manufacturer's lifetime warranty.
Love the bends makes it so much easier to shim.
Everyone needs one in their tool kit. Very handy and like the offset design.
Great tool! The angled shape makes checking valve clearance easy!
Got this set of feeler gauges for checking valve clearance on the four stroke but one problem the smallest increment on the gage is .008 the clearance on the intake valves on the bike are .005 with a plus or minus of .001 this gage needs to go a few thousands smaller I should have checked the specs before I brought it don't made the same mistake I did .
CR450F Honda needs 0.160 this one starts at 0.203.
But other than that, its a very nice tool.
BikeMaster 12-Blade Combination Tappet and Feeler Gauge set seems to be a good feeler gauge for setting my valves on my grizzly.
These would not work for checking valves on my YZ250f. they are to wide!!
if you want an easy item for valve adjustment measurement with easy axises to the shim location I advice to used this product because it have an angle at the end makes the measuring easy and comfort.
There have been no questions asked about the BikeMaster 12-Blade Combination Tappet And Feeler Gauge Set.