Acerbis Rally Profile X Hand Guard


$49.99 $63.99
22% Off - Save $14.00

Description See Also: 15 Reviews 7 Questions
Item #AHP001V

Read More
15 Reviews
4.5 out of 5 stars
5 Star   13 4 Star   4 3 Star   1 2 Star   0 1 Star   1
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Yodercross Verified Purchaser
Northern California
2012 KTM 65SX

Bought these for my son's 2012 KTM 65SX. I was nervous seeing how big they were in the packaging, but I went ahead and opened them thinking I could just put them on my 250 if anything. Good on Motosport for knowing their fitments! They fit his 65 bars just right (barely had to bend the plastic hand guards to mount the brackets etc) and as you can see, they look awesome! You will have to cut a hole in the end of your grips to insert the bar ends that mount the handguards to the end of the bars. See pics for details! Thanks Again Motosport!

Acerbis Rally Profile X Hand Guard
Acerbis Rally Profile X Hand Guard
Homes Top 1000 Contributor Verified Purchaser
Chandler, AZ, USA
Affordable Hand Gaurds

These are very affordable hand guards. They do not have the aluminum frame but they are solid in a spill. I have had them on for a month and I have had one spill. They did the job and held up. Make sure to tighten them good on he handle bar.

Kevin Verified Purchaser
Nashville, TN, USA
Amazing product

This product was a very high quality and super easy to install

Lawndartdog Verified Purchaser
Gainesville, FL, USA
Good product, problems poor service from MotoSport

The guards are great but the blister pack contained the wrong bar end expanding parts, too small. After several attempts with MotoSport I contacted Acerbis and they shipped the correct parts the same day.

TBONE Verified Purchaser
San Francisco Bay Area, CA, USA
Worked out great

good product fit my bike well

maxwell Verified Purchaser
Los Osos, Baywood-Los Osos, CA, USA
Cheap and effective

they do their job, but make sure they are clamped on tight, or they will rotate out of place on a hard crash.

Teddy
Vermont, USA
Very strong product!

Really strong plastic (surprisingly) held up to a dump at speed onto a muddy rock. However cinch the mounts down SUPER tight because whenever i crash hard, these things are always twisted up somewhere (still saves the levers).

LangWu99 Verified Purchaser
Michigan, USA
Great protection for a great price

I have been trail riding all year and bounced off of trees and berms and rutts and these things are still going strong, no cracks in them or my hands. They are definetiely worth the purchase and they look great on my bike.

94 yz 125
John
Miami, FL, USA
Excellent product

Bought for my Yamaha WR250R with stock steel bars, mounting on the end bar requires 2 x Acerbis Rally Bar Insert - Steel Bars, http://www.motosport.com/dirtbike/ACERBIS-RALLY-BAR-INSERT-STEEL-BARS.
Easy to install.

Acerbis Rally Profile X Hand Guard
RonixDHV Verified Purchaser
Hillsboro, OR, USA
Acerbis Rally Profile X Hand Guard

This is a great product. Bought these before I went on a long weekend of riding, and installed them on my 08 CRF 250R the morning I got to camp. They were super easy to install and look great as well. Another thing that I liked about these hand guards is that they are very durable. I let a buddy ride my bike (which was not a good idea) and he put it down twice but they saved all the levers and throttle. All in all this is a great product.

Acerbis Rally Profile X Hand Guard
KEubank
Pontotoc, MS 38863, USA
Great Value

Great product for the money. I bought these just before a three day trail ride. The break side mounted in just a few minutes, on the clutch side I had a little issue with clearance but was able to make it fit with a little fuss. They do not have the full metal wrap around, but they have stood up to more than I expected. For getting through small branches and briars they work perfect. I had one spill in a mix of rock and dirt coming out of a creek bed and landed directly on the right side of the handle bars. Not only protected my hand, but only minor scratches to the hand guard. I hit hard enough that I was fully expecting the guard to be broken. So far extremely pleased with this purchase.

2008 KX450F

JPastrana Top 500 Contributor Verified Purchaser
McAllen, TX
Easy

easy to install, comes with 2 sizes for bars..great quality, fits perfect.

yz250f
WildBillC Verified Purchaser
Roseville, Ca
Good stuff.

Third set of Acerbis hand guards. Couldn't be happier with these on my '12 450X. Great quality, look and fit.

Acerbis Rally Profile X Hand Guard
FLYINMIKE
GRANTS PASS,OR
ACERBIS

EVERYONE HAS THERE CHOICE BUT ACERBIS ARE THE BEST,AND SO IS MOTOSPORT!!!!!

DualDave Top 500 Contributor
Portland, OR
Budget Hand guards

I was running some Fastway guards and I broke them in a crash. I had not been paid at work yet, so I was on a tight budget. I ordered these up and put them on my bike. The kit comes with a universal mount kit, which was cool considering I run oversized bars. They mounted without any issues. I pleased so far with the build quality. If I crash and these break, they are a heck of a lot cheaper to replace. Thanks Motosport.

7 Questions
Answered:   7
Not Yet:   0
nizzle
Location: Gettysburg, PA 17325, USA
Q: Will these fit trx450er with 7/8 renth bars? (will they fit a atv)?
1 year ago
MotoSportExpert
MotoSport Staff Expert
1 year ago
A: Yes you should have no problem running these Acerbis Rally Profile X Hand Guards on your 2008 Honda TRX450er.
Homes
Top 1000 Contributor
4 months 17 days ago Location: Chandler, AZ, USA
A: Yes they will fit the 7/8" renthal bars.
keegan
Q: Will these handguards fit my honda 110 2015 model?
1 year ago
MotoSportExpert
Expert MotoSport Staff
1 year ago
A: The Acerbis Mini Rally Handguards would probably fit best on your Honda CRF110.
Tbone
Location: California
Q: What mounting kit will be needed for Renthal Twinwall Fatbars?s?
1 year 7 months ago
Hi, what mounting kit will these Acerbis Rally Profile X hand Gaurds need to fit on my Renthal Twinwall #922 Fatbars? (bike is a '13 KTM 500exc with stock throttle tube) I have the X-Rally Profile Universal Handguard Mount - 73-7513 (sku -385566), but don't know if this mounting kit will work, or if I need a different one?
MotoSportExpert
Top 1 Contributor
1 year 7 months ago
A: No. These are designed for 7/8" bars only.
Etni3s1
Location: British Columbia, Canada
Q: Fit on a honda crf100f?
2 years 2 months ago
will these fit no problemo on a honda crf100f without any modifications or threading in the sides of the handle bars?
MotoSportGrantK
MotoSport Staff Expert Top 1 Contributor
2 years 2 months ago
A: This is a universal Hand Guard that is made to be used on a wide range of bikes. It does not have a specific model fitment but you should not have any issues using it on your 2012 Honda CRF100F. You will need to cut the end of your grips off as the end of your bar is one of the mount points. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Steve
Location: ga
Q: Can i get these for my 2013 KTM 300 XC-W?
2 years 11 months ago
Hydraulic controls - Neken Tapered bars
MotoSportExpert
MotoSport Staff
2 years 11 months ago Location: Portland, OR, USA
A: These will not work with a tapered style handlebar. They only have mounts for a 7/8 aluminum handlebars. The Rally Pro X-strong kit will work with your Neken tapered bars and will allow room for the hydraulic controls.
Cody
Location: Monroe, OR
Q: Will this fit my 2001 cr125 with renthal bars? And do they have a support bar going through it? Thanks!?
Over 3 years ago
MotoSportExpert
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: This is just a plastic guard with no metal support. It will fit your 2001 CR125 if the Renthal bars are the standard 7/8" size. If you have oversize 1 1/8" bars, these will not fit. If you are looking for a hand guard with a metal support and protection, take a look at the Acerbis Rally Pro X-strong kit.
Cliff
Location: Massachusetts, USA
Q: Do I need the mounting kit in addition?
Over 3 years ago
Or does ti come with all the hardware I need to install?
MotoSportExpert
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: These handguards do include mounting hardware for 7/8" bars. These will work perfectly with the stock bars on your 2012 CRF250x.
John
Over 3 years ago Location: Miami, FL, USA
A: It comes with complete mounting kit for two sizes 7/8" (22mm) or 1-1/8" (28mm) dia. It comes with single size for bar insert.
LangWu99
Over 3 years ago Location: Michigan, USA
A: These come with everything you need. No need to buy other hardware, thats partially why I got them
Homes
Top 1000 Contributor
4 months 17 days ago Location: Chandler, AZ, USA
A: These hand guards come with all the mounting and hardware needed.
Yodercross
1 month 13 days ago Location: Cali
A: It has all of the hardware you will need for big and small diameter bars. I bought them for my son's 65 with 7/8" bars. It came with extra hardware for 1 1/4" bars though too. Be mentally prepared to cut a hole in the end of your grips.
1-7 of 7