K&N Spin-on Oil Filter

K&N Spin-on Oil Filter
K&N Spin-on Oil Filter

$9.99 - $17.99
10% Off - Save up to $2.00

Select your bike to see if this oil filter fits
  • Description
  • 34 Reviews
  • 1 Question
  • Fitment
Description Item #KNN0007

K&N Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. K&N Powersports Oil Filters are 'TUV' product endorsed and 'TUV' factory production monitored. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. K&N Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.

  • K&N Performance Motorcycle Oil Filters are constructed of resin-impregnated synthetic media, meaning high flow rate and outstanding filtration.
  • When you push your motorcycle to its limits, take comfort in knowing the K&N Performance Oil Filter is keeping up with your engine by allowing greater flow rate.
  • Large, uniform pleated synthetic filter media provides high flow rates and outstanding filtration - traps 99% of harmful contaminants.
  • K&N has developed their performance oil filter to optimize efficiency with high end synthetic and synthetic blend oils.
  • K&N performance oil filters come with a common 17 mm nut, drilled for safety wire, mounted on the filter shell. This makes it possible to change out the oil filter with ease and no special tools.
  • K&N also uses an anti-drainback valve (where applicable) to eliminate dry starts by preventing oil from draining back into the crankcase during engine shutdown.
  • On many models, K&N also incorporates a pressure (PSI) relief valve to prevent oil system damage.
  • To prevent installation damage K&N uses a rolled thread to avoid stripping.
  • Internally lubricated gaskets are used to provide a positive seal while allowing easy install and removal.
  • K&N Limited Warranty.

Read More
34 Reviews
5.0 out of 5 stars
5 Star   34 4 Star   4 3 Star   0 2 Star   0 1 Star   0
speedRcR69
Verified Purchaser
La Quinta, CA, USA

great product sticks great on chain.

MikeMike
Verified Purchaser
Vermont, USA
Top Quality Oil Filters

K&N oil filters are designed with performance in mind. All metal construction supports perfectly uniform filter media, designed for maximum oil flow under extreme conditions.

Jack
Verified Purchaser
ma
Spin on oil filter

A 1 product easy on / off quick delivery time.

Gtacoma
Verified Purchaser
Cincinnati,
Great filter

I have a bmw r1100rs and the oil filter sits up inside the bottom of the motor and you need a special bmw wrench to change it, however this filter makes oil changes very simple and easy, I would definitely recommend this product I ordered a couple cause these I couldn't find in any motorcycle shop or auto parts store

Paul
Top 1000 Contributor Verified Purchaser
Portland, OR, USA
K&N Spin-on Oil Filter

A terrific bargain compared to OEM oil filters and you K&N makes a fine quality product.

Kenny
Verified Purchaser
Ohio
Expectations Met

My package arrived just as scheduled and was exactly what I ordered. Details in the description of the item were correct and fitment was Perfect.

Skyehigh
Verified Purchaser MotoSport Staff Expert
Portland, OR, USA
Top notch oil filter

K&N is THE name in filters. Spend a couple extra bucks on these and baby your baby!

Nice to have the removal nut (don't wrench it on!)

TrickyRicky
Verified Purchaser
Wake Forest Nc
K & N oil filter is better than OEM

A no brainier the K&N oil filter is a improved oil filter. The hex on the end makes removal a quicker , easier job. The extra cost over oem is worth the money when you need to remove the filter and have to struggle to get a filter wrench through the header tubes. The K&N eliminates the struggle and is what oem should have done!

Rusty
Verified Purchaser
Seattle, WA, USA
Great Oil Filter

Easy to install and remove with the integrated nut.

Woody
Verified Purchaser
K&N All day Every day

I use their air filter and oil filter combo and they haven't failed me yet. Great products. Man, I needed an oil change. lol

K&N Spin-on Oil Filter
Skibum215
Verified Purchaser
Boulder, CO, USA
Must have

Pre drilled for safety wiring makes getting through tech a breeze. My only complaint is with the socket adaptor, they can round easily when removing.

Eirik
Bø, Norway
Great and affordable oil filter.

Great and affordable oil filter.

sjrider
Verified Purchaser
Sacramento, CA, USA
Best aftermarket oil filter

I have been using K&N oil filters for years. I have never had a problem removing the used ones, as opposed to some oem brands.Highly recommended.

Dennis
Verified Purchaser
Great prices.

Quick delivery and great service.

wingnut
Verified Purchaser
Tennessee, USA
K&N

The engineers took a simple idea of putting a bolt shaped protrusion on the top of the oil filter making the removal so much better to reach and remove the oil filter with a simple socket than trying to use a standard oil filter wrench.

r1dude
Verified Purchaser
new jersey
Perfect fit

fit behind the header pipe much better then my last filter. no leak im happy

Ronny
Top 250 Contributor Verified Purchaser
A must have for R6 owners

Everything iv'e read says that this filter has better material than stock but really, this makes oil changes about 20 minutes shorter on the R6. I used to take off the front sprocket cover to change the OEM filter, the nut on the end has made it a much more simple process. Thanks Motosport :)

DocGF
Verified Purchaser
Blythewood, SC, USA
K&N oil filter for R1

I like the quality and the fact that this oil filter has a built in nut to facilitate tightening and safety wiring.

ManyHelmets
Verified Purchaser
Rio Rancho, NM, USA
Solid Filter

Works great. Run it on a Gen 1 FZ1 and have had no issues. This is the third one on the bike.

StreetBiker
Verified Purchaser
PA
Good filter, welded on a nut is a must

On my bike, the exhaust pipes are in the way, its hard to get your hands in there and can't get a straight shot at it to correctly torque wrench it on without removing the pipes. So, i need the welded on nut to make sure it is on and to get it off! Will never use another oil filter.

1-20 of 34

Read More
1 Question
Answered:   1
Not Yet:   0
IMMPY
Q: DOES KN-170C OIL FILTER FIT 99 EVO?
Over 8 years ago
harleydave
MotoSport Staff Expert
Over 8 years ago
A: We have these for both EVO and Twin Cam. Be sure to profile your bike, we'll send you the correct one.
1-1 of 1

Read More
Fitment
See bike s that Fit this Part

Read More