All Balls Swingarm Bearing Kit

All Balls Swingarm Bearing Kit
All Balls Swingarm Bearing Kit

$14.68 - $68.62
10% Off - Save up to $7.63

Select your bike to see if this swing arm bearing kit fits
Description See Also: 27 Reviews 9 Questions Fitment Part Numbers
Item #ABL000T

Read More
27 Reviews
4.4 out of 5 stars
5 Star   18 4 Star   8 3 Star   4 2 Star   1 1 Star   0
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Hornet Verified Purchaser
Ohio, USA
It all fits

Good stuff works great

Kingjew454 Verified Purchaser
Michigan, USA
The dust caps suck.

Whats the good reason for the seal to have a built in washer thats collared down so it wont fit if there are any irregularities in the houseing? Make it out of rubber with a sting seal and put washers on either side... Same result but they will actually install right in almost any circumstance.... If you use this idea i claim all royalties btw. Thanks. P.s. if u want me to use your stickers on my quad send me good parts. U missed out on a lot of free advertisement.

Pkries2 Verified Purchaser
Canton

Motorsport products are always top quality and this product matches everything I've gotten form motorsport

Trailboss125 Verified Purchaser
Perfect fit!

Bought this kit for my 90' KX125 and it was a perfect fitment with no issues

OriginalOwner Verified Purchaser
Ca.
Appear to be fine

Bought in case the bearings in a used swing arm were not good. But the swing arm is low mileage and the used bearigs were fine. So I kept these as back up. These new ones apear to be fine and are as advertised. I really appreciate that they were available for my old bike.

AJW2115 Verified Purchaser
King, NC
Bearings NEED GREASE!!!

Bought this Kit for a 2004 Honda TRX 400ex. The kit did contain everything I needed, but be careful, I have found that some All Balls bearings are either not greased at the factory, or are only partially greased. For this kit I simply added grease and worked it into the needle bearings before installing them. I found that it is extremely difficult to replace swingers bearings in this atv. I recommend just taking it to an atv shop, it will save you loads of time. Also for the All Balls wheel bearing kits, remove one side of the bearing cover (the plastic side), and add as much grease as you can fit into it. I have found that some off All Balls wheel bearings are only greased on one side at the factory, so that they wear out faster and you have to buy more. Just add grease!!

dirtbikingfamily Verified Purchaser
North Carolina
Worked great

Rear end feels like new again, great all in 1 kit.

CdubsIII Verified Purchaser
Install good exact fit

Install went good they sent me exactly what I needed

JamnJP Verified Purchaser
Ocala, FL, USA
Great as expected!

I've used All Balls' bearings before and I highly recommend them.They always arrive well packaged and everything you need is included; they even include extra "cap" seals so you can change them if you like to clean and lube the bearings and swingarm bolt often. Great Product!

98YZ400F Verified Purchaser
Loudon, NH, USA
They work great

Swingarm and linkage bearings are my least favorite job, but these do the job as well as any and as always, Motosport has them in stock and sends them to my house for less money than having to go to the local shop and hope that the parts kid knows what I'm talking about.

kawanolo Verified Purchaser
Mayagüez, Mayagüez, Puerto Rico
Best buy

It fit and work perfect highly recomended

Zeus Verified Purchaser
Swingarm bearings

Just as advertised.... easily assembled and working as expected...Best price I could find on the NET.

crf487 Verified Purchaser
A little different from stock but great

A little different from the stock bearings but work well and installation was a breeze.

SanFranciscoCRF450R Verified Purchaser
Awesome Kit and Easy Install

Bought a 450r and didn't realize that the swingarm bearings were torched until there was crunching and cracking going on. No wonder the rear end felt horrible...

It was between this brand and another brand priced exactly the same. The internet had good things to say about both, but I liked the Teflon D coated washers since I've seen this used in Heavy Machinery. Also, an All Balls Racing sticker is way cooler than the other brand.

Install was super easy and the instructions included were spot on. I did one side at a time with the other side zip tied to keep everything in order. Don't buy a bearing puller. Be a man and go to a Home Improvement store to pick up some all thread, nuts, and various washers to make a puller. Also, you'll need various size sockets if you don't have those.

I'll buy All Balls for all my bearing needs from now on. The rear end feels amazing now.

robbie Verified Purchaser

Easy to install after old ones were out

crfbill Verified Purchaser
south jersey
Awesome

I put these in a 94 cr125 that my buddy has.. they fit in with no issues at all.I will use them for my own bike when ready...

1990rm Verified Purchaser
wv
Good stuff

Installs easy and holds up if you maintain your bike like your suppossed to

Jimbo Verified Purchaser
Just OK

Kit materials seemed to be of good quality. Rubber seal would not fit properly until I trimmed half of it away with a razor blade. Otherwise was happy w/ it.

pghdualsport Verified Purchaser
Pittsburgh, PA, USA
Bang for your buck

Excellent value. Be sure on inststallation to pack your beairings with grease to keep out any moisture, water will ruin them quick!

PAUL Verified Purchaser
ALL BALLS SWINGARM BEARING KIT

ALWAYS HAVE GOOD LUCK WITH THESE BEARINGS WHETHER LINKAGE, HEAD BEARINGS OR SHOCKS. THE PARTS ARE COMPLETE AND ALWAYS HAVE EXACTLY WHAT YOU NEED

See 7 More Reviews
9 Questions
Answered:   6
Not Yet:   3
pampmyride
Q: Bush size?
4 months 23 days ago
"What I have now is metric and measures 12x18x48. The factory discontinued the item. Thank you." seen this answer.....looking for steel bush that size. Are they available individually or in one of the kits? Mike
Wildermeade17
Q: I have a 1994 Kx250. Does this kit include what the oem diagram calls the swing arm sleeve L=58??
4 months 23 days ago
Gina
Location: Colorado
Q: Can you tell me what the dimensions are on the steel bushings?
Over 7 months ago
What I have now is metric and measures 12x18x48. The factory discontinued the item. Thank you.
Donald
Q: My 1980 xt250 has plastic or composite swing arm bushings stock. Does this kit convert it to bearings or will it have plastic bushings again?
2 years 2 months ago
MotoSportExpert
Expert MotoSport Staff
2 years 2 months ago
A: We're sorry, this product does not fit the 1980 Yamaha XT250.
RMgibbo
Location: Australia
Q: What size pivot bolt will fit this kit i have a 1992 rm125, and just bought a replacement bolt but its a different size so need to know if kit willfit?
2 years 3 months ago
MotoSportExpert
MotoSport Staff Expert
2 years 3 months ago
A: The All Balls Bearing Kits are built to OEM specs to work with other OEM components. The bolt can be found in the OEM section here:
http://www.motosport.com/dirtbike/oem-parts/suzuki/1992/rm125/rear-swinging-arm-%28model-n%29

Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
* All products sold on Motosport.com are for US models.
z400er
Location: Inman, SC 29349, USA
Q: Will this fit on the back of my quad?
2 years 5 months ago
MotoSportExpert
Expert MotoSport Staff
2 years 5 months ago
A: Yes this will fit the swingarm on your 2003 Suzuki LTZ400. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
bansheeraptor
Q: Will this work with a lonestar swingarm having a hard time finding new hardware even look at lonestar and they have nothing?
Over 3 years ago
MotoSportRyanT
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR, USA
A: If the Lonestar Swingarm uses the same bearings and collars as the OEM swingarm this kit would work. I cannot find anything that confirms this is the case and I would need to know what specific ATV the swingarm is on to find that information out. I would say your best bet may be contacting Lonestar directly to see if they sell a replacement bearing kit for their swingarms. http://www.lsracing.com/contact-lonestar-racing.php
addisongeiger
Location: Massachusetts, USA
Q: Is it right for my CRF150r?
Over 4 years ago
My bearings blew and i too everything out of the hub. Is this what i need to fix it or do i need the other ALL BALLS REAR BEARING KIT?
MotosportStaff
MotoSport Staff
Over 4 years ago Location: Portland, OR, USA
A: You would need a rear wheel bearing kit. This is for the swingarm where it pivots near the frame.
SanFranciscoCRF450R
2 years 6 months ago
A: Your question says "hub", so this leads me to believe you need wheel bearings and not swingarm bearings.
98YZ400F
1 year 4 months ago Location: Loudon, NH, USA
A: It sounds like you just need wheel bearings
BillyJM
Q: Install All Balls Swingarm Bearing Kit?
Over 4 years ago
Hello! I have recently purchased an 85 BigRed with no bearings currently in the Swingarm - I am curious as to how to install this kit?! Any help would be greatly appreciated!! Thanks, Billy J Nova Scotia, Canada
MotosportStaff
MotoSport Staff
Over 4 years ago Location: Portland, OR, USA
A: Billy,

First thing we would suggest is to check out the OEM parts diagram to make sure you aren't missing any other parts. Installation is pretty straightforward with pressing in the bearings/collars in the correct order. Make sure everything is greased and cleaned upon installing. Use the diagram as reference here:

http://www.motosport.com/dirtbike/oem-parts/HONDA/1985/ATC250ES-BIG-RED/SWINGARM-%2B-PROPELLER-SHAFT-85?mmy_source=oem
1-9 of 9
Fitment
See all bikes that this part fits...
See Fitments
# Part Numbers
Product Variant Manufacturer Part #
All Balls Swingarm Bearing Kit 28-1001
All Balls Swingarm Bearing Kit 28-1002
All Balls Swingarm Bearing Kit 28-1008
All Balls Swingarm Bearing Kit 28-1009
All Balls Swingarm Bearing Kit 28-1011
All Balls Swingarm Bearing Kit 28-1012
All Balls Swingarm Bearing Kit 28-1013
All Balls Swingarm Bearing Kit 28-1014
All Balls Swingarm Bearing Kit 28-1016
All Balls Swingarm Bearing Kit 28-1017
All Balls Swingarm Bearing Kit 28-1018
All Balls Swingarm Bearing Kit 28-1019
All Balls Swingarm Bearing Kit 28-1020
All Balls Swingarm Bearing Kit 28-1021
All Balls Swingarm Bearing Kit 28-1023
All Balls Swingarm Bearing Kit 28-1027
All Balls Swingarm Bearing Kit 28-1028
All Balls Swingarm Bearing Kit 28-1029
All Balls Swingarm Bearing Kit 28-1030
All Balls Swingarm Bearing Kit 28-1037
All Balls Swingarm Bearing Kit 28-1039
All Balls Swingarm Bearing Kit 28-1040
All Balls Swingarm Bearing Kit 28-1041
All Balls Swingarm Bearing Kit 28-1042
All Balls Swingarm Bearing Kit 28-1043
All Balls Swingarm Bearing Kit 28-1044
All Balls Swingarm Bearing Kit 28-1045
All Balls Swingarm Bearing Kit 28-1047
All Balls Swingarm Bearing Kit 28-1051
All Balls Swingarm Bearing Kit 28-1053
All Balls Swingarm Bearing Kit 28-1056
All Balls Swingarm Bearing Kit 28-1059
All Balls Swingarm Bearing Kit 28-1061
All Balls Swingarm Bearing Kit 28-1062
All Balls Swingarm Bearing Kit 28-1063
All Balls Swingarm Bearing Kit 28-1064
All Balls Swingarm Bearing Kit 28-1065
All Balls Swingarm Bearing Kit 28-1066
All Balls Swingarm Bearing Kit 28-1067
All Balls Swingarm Bearing Kit 28-1070
All Balls Swingarm Bearing Kit 28-1071
All Balls Swingarm Bearing Kit 28-1072
All Balls Swingarm Bearing Kit 28-1073
All Balls Swingarm Bearing Kit 28-1075
All Balls Swingarm Bearing Kit 28-1076
All Balls Swingarm Bearing Kit 28-1077
All Balls Swingarm Bearing Kit 28-1078
All Balls Swingarm Bearing Kit 28-1079
All Balls Swingarm Bearing Kit 28-1080
All Balls Swingarm Bearing Kit 28-1082
All Balls Swingarm Bearing Kit 28-1087
All Balls Swingarm Bearing Kit 28-1088
All Balls Swingarm Bearing Kit 28-1089
All Balls Swingarm Bearing Kit 28-1090
All Balls Swingarm Bearing Kit 28-1091
All Balls Swingarm Bearing Kit 28-1092
All Balls Swingarm Bearing Kit 28-1094
All Balls Swingarm Bearing Kit 28-1096
All Balls Swingarm Bearing Kit 28-1097
All Balls Swingarm Bearing Kit 28-1098
All Balls Swingarm Bearing Kit 28-1099
All Balls Swingarm Bearing Kit 28-1108
All Balls Swingarm Bearing Kit 28-1114
All Balls Swingarm Bearing Kit 28-1115
All Balls Swingarm Bearing Kit 28-1122
All Balls Swingarm Bearing Kit 28-1123
All Balls Swingarm Bearing Kit 28-1124
All Balls Swingarm Bearing Kit 28-1125
All Balls Swingarm Bearing Kit 28-1127
All Balls Swingarm Bearing Kit 28-1128
All Balls Swingarm Bearing Kit 28-1142
All Balls Swingarm Bearing Kit 28-1156
All Balls Swingarm Bearing Kit 28-1158
All Balls Swingarm Bearing Kit 28-1159
All Balls Swingarm Bearing Kit 28-1160
All Balls Swingarm Bearing Kit 28-1161
All Balls Swingarm Bearing Kit 28-1163
All Balls Swingarm Bearing Kit 28-1168
All Balls Swingarm Bearing Kit 28-1172
All Balls Swingarm Bearing Kit 28-1186
All Balls Swingarm Bearing Kit 28-1192
All Balls Swingarm Bearing Kit 28-1193
All Balls Swingarm Bearing Kit 28-1200
All Balls Swingarm Bearing Kit 28-1201
All Balls Swingarm Bearing Kit 28-1202
All Balls Swingarm Bearing Kit 28-1203
All Balls Swingarm Bearing Kit 22-1022
All Balls Swingarm Bearing Kit 25-1626
All Balls Swingarm Bearing Kit 28-0001
All Balls Swingarm Bearing Kit 28-0002
All Balls Swingarm Bearing Kit 28-0004
All Balls Swingarm Bearing Kit 28-1058
All Balls Swingarm Bearing Kit 28-1171
All Balls Swingarm Bearing Kit 28-1174
All Balls Swingarm Bearing Kit 28-1175
All Balls Swingarm Bearing Kit 28-1176
All Balls Swingarm Bearing Kit 28-1181
All Balls Swingarm Bearing Kit 28-1206
All Balls Swingarm Bearing Kit 28-1005
All Balls Swingarm Bearing Kit 28-1007
All Balls Swingarm Bearing Kit 28-1010
All Balls Swingarm Bearing Kit 28-1022
All Balls Swingarm Bearing Kit 28-1024
All Balls Swingarm Bearing Kit 28-1025
All Balls Swingarm Bearing Kit 28-1026
All Balls Swingarm Bearing Kit 28-1031
All Balls Swingarm Bearing Kit 28-1032
All Balls Swingarm Bearing Kit 28-1035
All Balls Swingarm Bearing Kit 28-1049
All Balls Swingarm Bearing Kit 28-1054
All Balls Swingarm Bearing Kit 28-1060
All Balls Swingarm Bearing Kit 28-1069
All Balls Swingarm Bearing Kit 28-1081
All Balls Swingarm Bearing Kit 28-1084
All Balls Swingarm Bearing Kit 28-1085
All Balls Swingarm Bearing Kit 28-1095
All Balls Swingarm Bearing Kit 28-1101
All Balls Swingarm Bearing Kit 28-1102
All Balls Swingarm Bearing Kit 28-1103
All Balls Swingarm Bearing Kit 28-1104
All Balls Swingarm Bearing Kit 28-1105
All Balls Swingarm Bearing Kit 28-1106
All Balls Swingarm Bearing Kit 28-1107
All Balls Swingarm Bearing Kit 28-1111
All Balls Swingarm Bearing Kit 28-1112
All Balls Swingarm Bearing Kit 28-1119
All Balls Swingarm Bearing Kit 28-1120
All Balls Swingarm Bearing Kit 28-1121
All Balls Swingarm Bearing Kit 28-1126
All Balls Swingarm Bearing Kit 28-1129
All Balls Swingarm Bearing Kit 28-1130
All Balls Swingarm Bearing Kit 28-1132
All Balls Swingarm Bearing Kit 28-1133
All Balls Swingarm Bearing Kit 28-1134
All Balls Swingarm Bearing Kit 28-1135
All Balls Swingarm Bearing Kit 28-1136
All Balls Swingarm Bearing Kit 28-1141
All Balls Swingarm Bearing Kit 28-1143
All Balls Swingarm Bearing Kit 28-1147
All Balls Swingarm Bearing Kit 28-1148
All Balls Swingarm Bearing Kit 28-1150
All Balls Swingarm Bearing Kit 28-1151
All Balls Swingarm Bearing Kit 28-1152
All Balls Swingarm Bearing Kit 28-1154
All Balls Swingarm Bearing Kit 28-1155
All Balls Swingarm Bearing Kit 28-1166
All Balls Swingarm Bearing Kit 28-1169
All Balls Swingarm Bearing Kit 28-1170
All Balls Swingarm Bearing Kit 28-1173
All Balls Swingarm Bearing Kit 28-1177
All Balls Swingarm Bearing Kit 28-1178
All Balls Swingarm Bearing Kit 28-1180
All Balls Swingarm Bearing Kit 28-1184
All Balls Swingarm Bearing Kit 28-1185
All Balls Swingarm Bearing Kit 28-1187
All Balls Swingarm Bearing Kit 28-1188
All Balls Swingarm Bearing Kit 28-1194
All Balls Swingarm Bearing Kit 28-1197
All Balls Swingarm Bearing Kit 28-1198
All Balls Swingarm Bearing Kit 28-1199
All Balls Swingarm Bearing Kit 28-1207
All Balls Swingarm Bearing Kit 28-1208
All Balls Swingarm Bearing Kit 28-1209
All Balls Swingarm Bearing Kit 28-1210
All Balls Swingarm Bearing Kit 28-1211
All Balls Swingarm Bearing Kit 28-1214
All Balls Swingarm Bearing Kit 28-1215
All Balls Swingarm Bearing Kit 28-1216
Report an Error