Dynojet Secondary Fuel Module

Dynojet Secondary Fuel Module
Dynojet Secondary Fuel Module

$124.77 - $224.99
10% Off - Save up to $25.00

  • Description
  • 1 Review
  • Ask a Question
  • Fitment
Description Item #DNO0011

Please double check your selection prior to placing your order, as this item is NOT eligible for return. Please see our full list of return restrictions.

Most of today's high performance, four-cylinder sport bikes have two injectors per cylinder. The Power Commander V connects to 4 of those 8 injectors. In virtually all cases the PCV's +250% / -100% fuel adjustability allows more than enough adjustment for all but the most radically altered engines. However, Power Commander recognizes that there are people building heavily modified engines (extreme big bore, turbo, etc.) that may require the adjustment of all 8 injectors. Enter the Power Commander V Secondary Fuel Module.

  • Connects to the upper injector rail using O.E.M. connectors.
  • With the gear position input connected on your PCV, all of the injectors may be adjusted on a "per gear" basis.
  • A "basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules simultaneously.
  • Allows for the use of the Dynojet Quick Shifter sensor on 8 injector bikes.

The S.F.M. connects to the upper injector rail using O.E.M. connectors. From there, it is only a single cable connection to the PCV. Once connected, you will be able to adjust both upper and lower injectors by as much as +250 /-100%.

If the gear position input is connected on your PCV, you will have the ability to adjust all of the injectors on a "per gear" basis (a complete map for every gear) as well as the ability to map each injector separately. That gives you up to 48 complete maps!

There will also be a "basic" mode that allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time. For those of you that have modified engines that require more fuel than 4 injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately, this setting is for you.

In addition to the increased fuel adjustability the SFM provides, it also allows for the use of the Dynojet Quick Shifter sensor on 8 injector bikes. On earlier Power Commanders an Ignition Module or Stand Alone Ignition Quick Shifter was necessary to use the DQS on bikes with 8 injectors. Now, you can have both added fuel control and shifter functionality at a very low price.


Read More
1 Review
3.0 out of 5 stars
5 Star   0 4 Star   0 3 Star   1 2 Star   0 1 Star   0
speedRcR69
Verified Purchaser
La Quinta, CA, USA
Durability   Ease of Installation   Performance   Power   Style  

Unable to connect. Poor instructions.


Read More
Ask a Question

There have been no questions asked about the Dynojet Secondary Fuel Module.


Read More
Fitment
See bike s that Fit this Part

Read More