pretty straight forward install---do yourself a favor and have a nice impact gun--then its just put on what you took off---pre soak your pads before install
EBC Dirt Racer Clutch Kit
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
I race xc and it seems like I'm always adjusting the clutch now on my Trx. I have the same clutch in my kx and it does fine but for some reason the Trx doesn't like it
Item came very quickly and had no problems putting it on, lasted so far. Can't really given accurate account of the durability because I only have about 10 hours on the new clutch
Great clutch pack. Simple installation. Springs included are a little to stiff for my wife to pull, recommend reusing the stock springs.
Ordered this since they don't make an oem kit for my bike, figured I'd try this since its cheaper than buying all the plates and springs separately. Installed it, seemed ok, but a handful of rides later, it was already shot. Couldn't do a decent start to save my life. Finally broke down an bought the oem parts and haven't had a problem since.
I have used clutches from EBC many times but this is the first time I had a sizing issue on customers '07 KX250. The actual stack height was off by 1.75mm so I was using up all the adjustments and still not getting full release.Have had several conversations with EBC and after exhausting every posibility, that stack was the problem. They have issued a replacement and all is good.
it was i expect or more
product came with completely wrong springs out of 6 three different sizes. EBC sent me correct ones within 3 days ..
I am a so called "motodad" and this clutch kit comes with the springs, steels, and fiber plates. We run it in my son's 2014 Kawasaki KX85. These kids racing the 2-strokers are hard on the clutches and this product works well for the money, especially when you change the oil after each ride day or race day. Great product for the money.
Lasted 1 ride on a mx track. Installed on Yamaha YZ 250, soaked the fiber plates overnight before installing in a brand new Hinson clutch basket. I lost the clutch after about 4 hours total on the 1st day after installation. Worse yet, is that these plates scored my brand new clutch basket. I promptly replaced with OEM Yamaha clutch plates and have not had a single problem in 1.5 seasons of hard riding. Don't be tempted to save money here. In the end it cost me much me much more $$$
Great clutch , easy to install great hook up and last
all the performance you would expect from EBC i run them in all my bikes after the stock products wareout .
works as good as ones at 2x the price
works and fit like it should stiffer spring also were sweet not too stiff
Great clutch kit. Only reason giving a four on performance was because of a lot more clutch adjustment was needed on th
Nice clutch, better than TM Factory.
Great price, and great power!
Worked well went rite in and had no problems on slippage anymore!
The clutch plates are so thin you have to use an extra one. You are supposed to measure the new and old plates for wear based on their thickness. My old worn out plates were thicker than these are new. Save your money and get something better!
I bought this clutch kit which included "heavy duty springs" The frictions and steels look real good and they do their job. Now the springs are a different story. I installed the springs and torqued them to spec and ended up cracking my pressure plate and bending my clutch shaft arm. The srings were to big and wouldnt allow the clutch in disengage. Had to put the factory springs in it for now.