Competition Werkes Fender Eliminator Kit - Standard

Competition Werkes Fender Eliminator Kit - Standard
Competition Werkes Fender Eliminator Kit - Standard

$89.99 - $167.99

Description See Also: 19 Reviews 14 Questions Fitment
Item #CWE0001

Read More
19 Reviews
4.6 out of 5 stars
5 Star   12 4 Star   6 3 Star   1 2 Star   0 1 Star   0
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Speak917 Verified Purchaser
Exactly what I was looking for...

Competition Werkes.... Need I say more? Awesome quality and really cleans up the rear end of my CBR. Exactly what I was looking for.

Kitchener, ON, Canada
08' ZX-10R

Instructions were a bit terse and the pictures were difficult to view due to poor photocopying.The quality of the actual product is decent outside of 3 complaints:

1) The wires don't seem to be well protected. I'll see how they hold up after a season.

2) I had to drill holes into the lc holder because the holes didn't match up with my plate

3) license plate light is too close to the plate leaving it poorly lit (which is good or bad I guess)

Overall, the product is adequate and delivers as advertised but I expected a bit more for the price paid.

Minneapolis, MN
Looks Great

I purchased this product for my 2009 FZ6R, and I really like it. It was fairly easy to install because the tool kit my bike came with was all that was needed. My bike looks so much better without the stupid plasctic fender sticking off the back! The only thing I did not like was the blinker wire connectors. They do not just snap into place, you have to use adapters provided in the kit.

Good Buy

This product is definitely a good buy, fair price, makes the bike look way better. Shipping was extremely fast, very impressed. Only thing that i wasnt satisfied with was the install, kind of a pain, other then that this product is fantastic and i would recommend it to anybody.

Nice Item

Nice item that was easy to install on a 2006 Yamaha FZ6. The replacement blinkers are kinda cheesy but it will be easy to upgrade when we find a better choice.

Pricey but works and looks good

Not a lot to it for the price but it is good quality and does look nice.

2003 cbr 600 f4i

Azusa, CA
Smart purchase

its easy to install. o and it gives u a awsome look. thumbs up!!!

Competition Werkes Fender Eliminator Kit - Standard
Competition Werkes Fender Eliminator Kit - Standard
philadelphia, pa
Nice piece

I bought this for my '04 yamaha fz6 as a replacement for what was on there. It fits great. Easy to install.
Only complaint was it didn't come with led bulbs. It came with incandescent ones. And the plate light is a pain to change. But I love it

McMinnville OR
Great buy

fits good looks good its a good mod to the 2011 ninja 250r

Sigel, PA
Pretty good product

just got this for my 2010 fz6r a few days ago. only reason its getting 4 stars is because when i finally got to hookin up the turn signals the wires were a little short. but chop off some of the old ones put a few plugs on and your in business. and those little plastic clip things then send to splice the wire.. save your time go to walmart buy some rubber coated connectors and plug them into them there alot better. good product though and looks 100 times better than stock

Philadelphia, Pa
Great Product, Easy Install

I bought this fender eliminator for my 2008 Kawasaki ZX 10R. Install and mounting was good, they install kit was short the required wire connectors for the supplied turn signals, but I had a few laying around, so no problem there. It does require to remove the rear panels, but no issues. The supplied turn signals are nice and bright, I modified the installation of the signals a little and drilled 2 new holes instead of using the factory plunger holes, was more secure this way. Overall not a bad kit at all, I really like how far down it puts the plate.

Only thing they need to correct, is the color of the plate light mounting plate and led assembly, its grey. And as you know all bike underbodies are black. So I simple scuffed it up a little bit, primed it, and painted it trim black. Now it looks factory!

I would buy this kit again. Enjoy.

NoHander Top 100 Contributor
Scotts Valley, CA
Looks Sweeeet!

This really makes my 2006 ZX10R look much better than the ugly stock fender. It was super easy to install except I was unable to use the Stainless Steel housing for my wires. The conduit was simply too rigid and also sharp on the ends so I was unable to bend it correctly to fit in the little hole. It looks even better without it since the wires are super tiny anyway.

Also I should have used my common sense and cut the wires AFTER the plug not before like the instructions say. When you cut it before the plug you have much more wire making it easier to cut and splice back together. If you follow the instructions like I did you will have to take apart the tail section too to get to the wire plug.

350gt Top 1000 Contributor
SanAntonio, TeXas
Cool look, way better than the oem fender.

Cleaned up the rear nicely!

Detroit, MI
Good purchase

Bought this for my Ninja ZX 600R looks great and was fairly simple to install. Fits perfect just wish the picture directions were a bit more clear to ease the process. But, overall very satisfied with the product and the look.

Portland, OR
Spendy but worth it

Got this for my '06 GSX-R750 and I'm very happy in all aspects. The fit and finish is excellent. Comes with complete hardware including license plate screws. The screws that mount the plate to the bike are the same size hex as the bodywork (4mm), which I thought was really cool. The light has a blue-ish tint which matches my HID headlights, also very cool. I know you can diy a fender eliminator for the fraction of the price of this one but I feel it is totally worth it.

alliance, ne
Good buy

good product. simple install for the most part. the only complaint would be the wires for the turn signal are too short on my R1 but if u use the factory pigtails no problem. looks great!

ritelite77 Top 1000 Contributor
Quick and easy

a quick and easy way to clean up the tail of your bike. and it even comes with an led for the plate light. cant beat it.

Roseville, CA
Looks Great

Instructions could be better, but otherwise great!


2 minutes and your done

14 Questions
Answered:   14
Not Yet:   0
Location: Philadelphia, PA, USA
Q: Will there be any cutting or drilling required for my 2015 fz6r? is there a better product available for me ?
1 year 9 months ago
Expert MotoSport Staff
1 year 9 months ago
A: Some cutting and drilling of the body may be necessary on your 2015 Yamaha FZ6R. The Competition Werkes Fender Eliminator Kit is a good kit and one I would recommend and run myself. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Location: Kansas city missour
Q: For the 2007 kawasaki zzr, does the kit come with new/low profile turn signals? Does it require cutting? Does it change the storage compartment?
2 years 6 months ago
Top 1 Contributor
2 years 2 months ago
A: The Competition Werkes Fender Eliminator Kit - Standard for your 2007 Kawasaki ZZR600 will reuse the stock OEM turn signals. Some cutting and drilling may be necessary on some models, but only to the black plastic fender, never the frame or bodywork.
Q: Will this kit a 1996 suzuki gxs600f?
2 years 10 months ago
I am working in repairing/upgrading a 1996 Suzuki gxs600f. Will I need to leave the rear fairing on to install this kit?
MotoSport Staff Expert
2 years 10 months ago Location: Portland, OR, USA
A: Unfortunately, this fender eliminator kit is not designed to fit your 1996 Suzuki GSX600F Katana.
Location: Norwalk, OH, USA
Q: What is the best fender eliminator with turn signal lights for 2012 fz6r?
Over 3 years ago
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: It will depend who you ask on which kit is said to be the best. I have always had great luck with the Competition Werkes kits and they do have their setup available for your model. It includes short stalk turn signals and an LED license plate light. For your 2012 FZ6R, installation take about an hour.
Location: Norway
Q: Lightningsystem and cuting on honda cbr 600 f4i 2001?
Over 3 years ago
Do you use the old rearlight or is it with an new rearlight (taillight)?. Do you need to cut/drill or make anny big modification to the bike, when you remove the stock and installing this new fender kit on an honda cbr 600 f4i 2001 mod? or is it simply to unscrew the old and screw in this new one? i know the locking system for the rear seat have to be modified, but annything els?
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: This will utilize the stock taillight and does not include a new one. Here is Competition Werkes description of the modifications required :

"With the F4i.... The black plastic undertail does have to be trimmed off in order to mount this kit. There is no modification to the frame or subframe. The locking mechanism to the rear seat will get modified... But, can easily go back to stock."
Location: Santa Cruz, CA, USA
Q: What r the specifics for 2013 zx10r kit?
Over 3 years ago
need to know what exactly comes in the kit for a 2013 zx10r (turn signals, license plate light, etc)? also will cutting of wire be necessary or does the kit have the plugs so u dont have to cut and strip wire? any other install info would help like drilling requirements and such.
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: This kit will require no cutting of the bodywork on you ZX10r 2013. You will have to wire the turn signals in as they do not come with bike specific connectors. I have attached an Instruction sheet directly from Competition works for you That shows installation and a complete parts list for the kit.
Q: For the 04 zx636 does this kit come with the led license plate light?
Over 3 years ago
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: This kit does not include an LED license plate light but comes with the provisions to utilize the stock license plate light. This kit will include signals for your 04 ZX636 though.
Q: Tail Light?
Over 3 years ago
Does this kit include the tail light pictured? If not does anyone have any Idea where to find it? Also would this fit a 2009 ninja 250? Thanks
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: The taillight that you see pictured is actually of a completely different model bike. It's an example photo since we simply cannot have images of every model with the product installed. Your model will come with the new license plate bracket and necessary hardware.
Location: Brazil
Q: This Eliminator works in Yamaha XJ6 diversion?
Over 6 years ago
I have a Yamaha XJ6 Diversion 2010 and i din´t found this bike in a menu options. I just whant to know if you have any body parts for this bike! eliminator kit, brakes, sport grips (rizoma) and exhausts. sorry about my terrible english and tks for suport! regards!
Expert MotoSport Staff
Over 6 years ago Location: Portland, OR
A: I believe the US version of that bike is the FZ6R. I can't guarantee that all parts will be interchangeable.
Location: Shelton,CT
Q: Will i need to cut or drill anything on my 07 gsxr 1000?
Over 6 years ago
MotoSport Staff Expert
Over 6 years ago Location: Portland, OR
A: When installing aftermarket parts always be prepared to make it work.
1-10 of 14
See all bikes that this part fits...
See Fitments