way better then the stock ones, a must have upgrade for any bike
All Balls Steering Bearing Kit
- 31 Reviews
- 8 Questions
The All Balls Steering Bearing Kit is designed to replace worn out steering components to regain lost - or improve stock - steering performance.
- Comes with upper and lower bearings with races and lower seal.
- Direct replacement for O.E.M. tapered bearings - upgrade for ball style bearings.
- Most kits come with tapered roller bearings.
- A performance upgrade for stock bikes that use loose ball bearings.
- Note: Kit contents will vary by fitment and are subject to change.
It is a good product at good prices
Fit ,quality and delivery was spot on thank you Motorsports.
No complaints at all. Factory quality at a fraction of the price.
Didnt come tapered as described but they still fit the bike just fine
Fit well and were delivered on time no hassle
Fit my CR250. Time will tell if these last as long as OEM, I think they will be fine with an occasional re-packing. I made a tool to install the new lower (pressed) on bearing by taking the old bearing inner piece and grinding out the inside diameter slightly so that it would slide down the shaft perfectly against the new bearing, then used a 1-5/8 OD pipe to drive this "tool" down to press on bearing. Look at the instructions on the allballs website before you start.
Replaced the loose ball bearings with this tapered set on a '99 Ninja 250. Didn't correct the wobble on deceleration I was experiencing (the original bearings were fine - it was rear wheel alignment), but the steering is still smooth and easy. A huge benefit to a tapered bearing over a set of loose balls is durability, and the fact that removing your triple doesn't set 40 little bearings bouncing and rolling all over the place when you remove it. Installation can be intimidating on your first time - if you're driving the races in or removing them with a hammer and drift just be sure you stay square and don't be shy. A huge bolt, nut and some large washers make a decent tool to press the included bearing races into the steering stem. A pipe works well to drive the lower bearing onto the triple, just remember to put the included seal on first.
Taper bearings way to go,if your bike has round bearings. Improve steering and feels solid, more area contact with taper bearings . Used taper bearing for my other bikes.Motosport customer service, #1
Seriously the single best mod I've done to the Lil Blue Donkey,Much more precise steering with almost zero, nip, nada drag.....
Solid, smooth feeling bearings. Removed all slack and play from my steering.
I installed this on my raptor and it was a direct fit with no issues. My steering is much tighter now.
These bearing are a nice option for someone looking to save a little money over OEM. Everything fits perfectly, however the top dust seal washer is smaller than OEM, and doesnt quite cover the entire steering column, so I jut reused the OEM seal. Other than that the bearings feel super smooth.
I have bought several of these kits for whenever I change a steering stem on my yfz450's. They seem to take abuse and last a long time.
Best steering stem bearings I have yet to install!
have been installed and have had no issues.they actually had a extra seal which should really help keeping out dirt and water.
Any steerin bearings need patient to install it.
I bought these bearings about a month ago or maybe two. to replace the stock bearings in my RM . it didn't take long to get them in and ready to roll. just used a mondo socket and mallet to get em in real good. but anyways they are super nice fitting and all kinds of smooth. buy them. they come with a cool sticker. totally worth it.
Dirt Bike / ATV: 1-888-676-8853
Steering Brg - Seal Kit Kawasaki VN1500 Classic 05-08, VN1500G 99-01, VN1500J 99-00, VN1500L 00-04, VN1500N 00-02, VN1500P 02-03, VN1500R 01-05, VN1600 Classic 03-08, VN1600 Mean Streak 04-08, VN1600 Nomad 05-08, VN2000 04-05, VN2000 A & F 06-10, VN2000 Limited 05, ZX1100D Ninja ZX11 93-01, ZX750 (Ninja) ZX7 91-95, ZX750 (Ninja) ZX7R 91-03, ZX750 (Ninja) ZX7RR 96-97, ZX900 Ninja ZX9R 94-99, Suzuki VZ1600 04-05
I would run your vin to make sure you have the correct bike selected for this kit first. Also all products sold are for US MODELS ONLY!