My Hypermotard tipped over and the shifter tip broke off which required a complete shifter from Ducati at $130. Before I dropped the cash on a new shifter I thought I would drill the end of the shifter and bolt on the woodcraft pedal. Glad to say works great and looks better than stock.
Woodcraft Replacement Shift Pedal Tip
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
I bought this peg to replace the press-fit unit that popped out of the shifter arm on my '09 Street Triple R. While the bolt on this one was of a smaller diameter than the hole in the shifter arm, the countersunk head helped center it nicely. I added a stainless steel lock washer between the peg and the arm, used RED (not blue like the installation instructions state) and managed a good, tight fit. About 500 miles and it is still snug. Oh yeah...and since the dimensions are not provided by MotoSport: This peg is about 3/4" in diameter and 2" long.
There have been no questions asked about the Woodcraft Replacement Shift Pedal Tip.