Dynojet Power Commander 3 USB

Dynojet Power Commander 3 USB
Dynojet Power Commander 3 USB

$274.99 - $399.99
20% Off - Save up to $100.00

Select your bike to see if this fuel control unit fits
  • Description
  • 8 Reviews
  • 10 Questions
  • Fitment
Description Item #DNO000F

Please double check your selection prior to placing your order, as this item is NOT eligible for return. Please see our full list of return restrictions.

The Dynojet Power Commander plugs inline with your bike's stock fuel injection system. It uses O.E.M. (original equipment manufacturer) style connectors making installation easy and quick. The Power Commander III USB allows a full range of fuel adjustment, as much as +/- 100% over stock. Adjustments can be made either with a Windows-based computer or by using the face plate mounted button adjusters. No permanent changes are made to the bike's system. Once the unit is removed the bike reverts to its stock settings.

  • Hassle free USB communication: The Power Commander USB will instantly and automatically connect to the Power Commander Control Center software once it is installed. Simply "power up" the unit and connect the supplied USB cable to the computer and PCIII USB.
  • Onboard notes storage: The PCIII USB stores the notes from the map in the onboard memory. This makes it easy to see exactly which map is loaded. The notes, just as the map itself, are automatically retrieved upon connecting to the unit.
  • Individual cylinder adjustment: All PCIII USB units have a "cylinder trim" adjustment feature that allows you to "offset" fuel to one or more cylinders. Additionally, for advanced users, the PCIII USB allows individual cylinder mapping. Now each cylinder can be mapped individually throughout the entire RPM / throttle position range.
  • Enhanced "file compare" utility: The PCIII USB software allows you to compare two map files without the Power Commander connected. There is a numerical display as well as a brand new graphical display.
  • Easier to use "button adjustment" mode: The button adjustment has been made easier by introducing a "startup delay". This lets the user have enough time to start the bike and then switch the PCIII USB into "button adjust" mode. The ranges of the buttons are now displayed in the software. Simply connect the unit to the computer and press one of the buttons. Their ranges are shown on the screen.
  • "Expansion port" for upgrades and accessories: The "expansion port" allows easy connection of accessories such as the new ignition module, Quick shifter, Multifunction Hub, Pressure Sensor display and LCD display unit. Automatic map retrieval upon connection - As soon as you connect the PCIII USB to the computer and launch the software, the map installed in the PCIII USB will be displayed.
  • 9V "Power Up" adapter: Every PCIII USB comes with a "power up" adapter which allows users to program and interface with the Power Commander on their desktop without being connected to the bike.
  • Accelerator Pump You can adjust: A) The amount of fuel to add, B) The number of engine revolutions during which fuel is added, C) The sensitivity of throttle movement under which the accelerator pump is activated.
  • Base Map: The Power Commander is supplied with a given (base) map stored in the microprocessor. This (base map) is typically a map that has been developed to provide an improvement for most combinations matching the map description (i.e. stock bike or performance exhaust and air filter).
  • Rev Xtend (for Harley-Davidson models): Due to the fact Dynojet controls both the injector and coils on the bike they are able to increase the rev limit of your stock ECM without an expensive "flash" upgrade from the dealer. The unit is able to increase the rev limiter as part of the normal Power Commander functions without additional cost.
  • Start Fuel (for Harley-Davidson models): This allows you to add additional fuel during startup. On heavily modified and/or large displacement engines (i.e. 124 cubic inch), extra fuel is sometimes required to ease starting. This is a software adjustable setting that makes it possible to increase the amount of fuel injected into the engine during cranking without making the idle overly rich once the engine starts.

Note: This product is intended to be used only on racing vehicles on closed courses, and not for use on roads or vehicles otherwise subject to emission control requirements. In California, this product should not be used on any vehicle that is registered or licensed for use on public roads.

Read More
8 Reviews
4.5 out of 5 stars
5 Star   5 4 Star   3 3 Star   1 2 Star   0 1 Star   0
Verified Purchaser
Boise, ID, USA
Durability   Ease of Installation   Performance   Power   Style  
Avoid unless you have some spare cash...

Whether it was the Placebo Effect is still up for debate but I believe I noticed a significant mid-range power increase. Whether it is worth $300 is also up for debate. I paired this with a K&N air filter and Two Brother's slip-on exhaust on a 2005 Kawasaki Z1000. I need to get it tuned to see the torque and power curve improvements!

If you are knowledgeable, the power commander software gives you control over the fuel-air mixture at all throttle positions and RPM so you can tinker and make a custom mapping if you so desire.

Top 1000 Contributor
Charlotte, NC
Durability   Ease of Installation   Performance   Power   Style  
2006 GSX-R1000

Terrific. Installs easily. Saw a nice bump after installing it to smooth out the new filter and exhaust that was installed. Very easy to store and swap maps as well!

Verified Purchaser
Belgrade, ME, USA
Durability   Ease of Installation   Performance   Power   Style  
Power commander 3 usb

Installation was very easy. I bought a power commander in the past and had it costom maped made alot more power and was a smooth power all the way through the rpm. A must have ...

Ease of Installation  
Good Product

Easy to install and easy to use with supplied software.

Verified Purchaser
Durability   Ease of Installation   Performance   Power   Style  
Power commander

I perchist this items and when it arrived they shipped me the wrong part it was little upsetting but motosport was pretty good about getting me the rite part back fast.


I bought the power commander for my GSXR-600 and it turned my bike into a beast! I HIGHLY recommend buying this if your putting an aftermarket exhaust. It's very easy to program with your PC and the instructions for installing are really good!

Chicago, IL
Great Item.... MORE POWER

Took about 30 min. to install with the help of a friend to hold the gas tank. Box was missing one item the quick connector of the ignition so I did have to hard wire it to the bike. I was ok with it because I will never take it off the bike. It is a must have if change air intake and exhaust on my Mean streak. Easy to use software and noticeable power increase. Smoothes out engine idle and more responsive on the throttle.

Great add on product

product was everything it was said to be ez install and very user friendly it came to my house very fast and now i am going very fast thanks keep up the good work

Read More
10 Questions
Answered:   9
Not Yet:   1
Q: How do I get a USB for an existing Power Commander Unit?
23 days ago
I recently bought a 2000 Harley FLTHCUI, I found that the bike has a Power Commander Unit installed ... What type USB cable is needed and where might I obtain one?
Q: I have a 2006 Kawasaki Vulcan 1500 Classic Anniversary Edition F1. Will this work for my bike.?
Over 11 months ago
My understanding is that my bike is the same as the 1500N classic with a different paint job.
MotoSport Staff Expert
Over 11 months ago
A: Yes the Dynojet Power Commander 3 USB will fit your 2006 Kawasaki Vulcan 1500 Classic Anniversary Edition F1, same as the Vulcan 1500N classic. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Q: Wondering if pc 3 will fit on 2006 yzf r6?
1 year 3 months ago
It was on gsxr 750 but I haughty it and put on r6.
Expert MotoSport Staff
1 year 2 months ago
A: If the power commander you have is part number 418-411 it would work. I would contact DynoJet directly and they should be able to tell you if the PC you have will work on your R6.
Location: South Carolin
Q: Will this software work on my macbook pro laptop from apple?
1 year 9 months ago
Cant seem to tell if there is anyway to run the programs for this on a mac laptop. I have the microsoft office package but obviously not the windows operating system. Thanks. Also what kind of power is expected from one of these on a 96 cubic inch harley motor?
Top 1 Contributor
1 year 9 months ago
A: No, at this time Dynojet has not developed software for any other computer operating system than Microsoft Windows. Every version of Windows since 95 SP2 will run all of our current software.

There are many variables to each application. The Power Commander allows for tuning to the perfect air/fuel ratio will ensure that the engine can produce the maximum possible horsepower for that given combination.
Q: Says it fits an 03 and 04 Suzuki SV1000, Does it also fit the 2007?
2 years 5 months ago
I have seen on other sites this is plug and play with my bike.
MotoSport Staff Expert
2 years 5 months ago Location: Portland, OR, USA
A: For your 2007 Suzuki SV1000S you would need the Dynojet Power Commander 3 USB EX.

Here is a link to the Power Commander for your bike:
Location: San Rafael, CA, USA
Q: Is this poduct, purcased for a 2006 flhx compatable with a 2010 flhx?
2 years 9 months ago
MotoSport Staff
2 years 9 months ago Location: Portland, OR, USA
A: Unfortunately, the Power Commander III for the 2006 FLHX will not work with the 2010 Model. The 2010 requires the use of the Power Commander 5.
Location: Franklin, Louisiana
Q: How can I find out if my power commander 3 is properly working after being installed?
Over 3 years ago
I bought the bike with the pc3 already installed.
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: If the bike runs with the unit installed, its working. You can also connect a USB cable to the unit and open the Control Center Software on your PC for the device to see what tune is loaded, see the live gauges, tune the bike, etc. If you need the software it can be obtained from Dynojet's website http://www.dynojet.com
Location: Daytona Beach, FL
Q: Will it work on a computer running Windows 7?
Over 3 years ago
Dynojet Power Commander 3 USB The fact sheet says the software only goes up to Windows XP. All my computers are running Windows 7. This will be used on my Harley Davisidson FLHTCUI (Electra Glide Ultra Classic - fuel injected)
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: Even though Power Commander does not state that it will work on Windows 7, it does and plenty of people are using it without issue.
Q: Would the pc3 work on a 2009 yamaha r6?
Over 3 years ago
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: Yes, there is a Power Commander 3 available for the 2009 Yamaha R6. When shopping, just make sure you are under the Sport Bike store front and select your model's information before adding to the cart.
Q: Will the software that comes with it work on windows vista?
Over 6 years ago
MotoSport Staff Expert
Over 6 years ago Location: Portland
A: The Power Commander should work on any other the newest Window versions.
1-10 of 10

Read More
See bike s that Fit this Part

Read More