No one ever said "I wish I hadn't bought the Pit Bull." I replaced my lesser fork lift and steering stem lift stands with this one. The others were okay, but never cared for the way my previous fork lift stand had plastic nubs that that go up into the bottom of the fork tubes. Never seemed that stable. This is simply the right tool for the job(s) and when matched with the Pit Bull rear I've been using for 12 years, I'm sure will last forever.
Pit Bull Hybrid Dual Lift Front Stand With Pin
- 3 Reviews
- 1 Question
The Pit Bull Hybrid Dual Lift Front Stand is based upon a modular design and can be easily converted to lift from the forks OR the lower triple tree by simply swapping out a few parts (all included) in a matter of seconds. It also features 7 indexable height adjustments, which is very desirable when removing the forks on your motorcycle or even when lifting a bike with uneven forks from underneath the forks. And, the upper portion of the Hybrid Dual Lift features a threaded 6 mm hole which will allow you to install a simple 6 mm bolt to serve as a caliper holder.
Note: The Hybrid Dual Lift Front Stand is available with an optional removable handle which you can select at purchase for a small extra charge.
Included with the Pit Bull Hybrid Dual Lift Front Stand With Pin:
- The Pit Bull Hybrid Dual Lift Front Stand with either standard or optional removable handle.
- One Pit Bull Front Stand Pin appropriate for bike fitment.
This stand is top notch. Built very well. Easy to use.
The front fork stand does an excellent job of lifting the front of the bike off the ground so you can remove the forks without the stand ever touching your plastics. You can also raise the front from the bottom of the forks as well.