great price, easy install. even works on a pro circuit silencer.
FMF 2-Stroke Silencer Packing
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Not much to go wrong here. Installs as it should. makes my Braap less braap I guess. doing some carb tuning and this is one thing that could effect performance that needs to be done before tuning.
The wife and I are enjoying my new packing. Quiets things down a lot.
Good price for standard go to packing
I used this to replace the oil soaked packing in my 06 KX. It was simple to do once I figured out the directions were not completely accurate for my silencer. I believe the instructions were written for an FMF silencer (which makes sense since it's an FMF product).
Super easy to work with, holds a lot of oil, noticeable difference in performance and sound. Highly recommended fluff, won't use any other exhaust brand.
The packing is good and the price is OK just that it's not enough for a good pack job .
Great packing material. It brought new life to my son's 2003 KTM Mini!
Second time I have ordered this packing. Good stuff, installs easy and required minimal trimming
Needed packing for my kx250, and this stuff worked great. You wouldn't think it'd increase the power that much, but it does. Installed easy, and cheap enough. Very happy with this purchase
Use this packing whenever i repack my 2-stroke silencer. Very good durability and lasts very good.
I use this when repacking my Turbine Core II silencer. It lasts as long as any brand of this type packing material that I have tried, perhaps longer. The amount they give you is just the right amount to get the job done. When fresh, the sound is reduced significantly and with a good tone. In order to get maximum life from this product, it's important that your jetting is correct for where you ride. The price is good too, although you can spend more for a fancier product if it makes you feel better. But in reality, you won't get any better performance than the FMF 2 stroke packing provides.
Made a difference in the performance, I didn't expect it too but it did.
Very pleased with how easy it was to do for my first time ever. I re-packed my FMF powercore 2 and it took about ten minutes, great product.
It definitely runs better and it sounds a little different. I'll buy again when needed.
I use fmf packing as my replacement packing in all dirt scooter exhausr. No matter the brand, stock or aftermarket this is the best packing for a long lasting exhaust.
works just as good as any other packing
This was supposed to be for a YZ450 Titanium re-pack. Since I have Hacker pals in Wisconsin playing games, I enjoyed their attempts to change my order at Motorsport to my advantage--thanks Jerks. Ha--I added a removable spark arrestor to my Titanium muffler, so it can be removed for race tracks--the older packing was in dire need of replacing and was hardened--I didn't like the leaks around the joint ties, and I didn't like the elongated affects of unnecessary back pressure. I did like the narrower tube as opposed to FMF shorter but stockier muffler. So I completely drilled out rivets, to get to the inner pipe, cleaned it all up, and rolled in this new packing which fit my YZ450 muffler perfectly. I then re-sealed mounting surfaces, tapped new holes, filled them and cut off about 2" of the stock muffler for less back pressure--added the spark arrestor and it came out great--far better tone, less back pressure for built head at higher compression piston. Super nice product--easy to work with, and if you take your time, it's well worth the effort as opposed to a $400.00 re-silencer. I get lower decibles, cooler outer muffler temperatures and a deeper growl with less back pressure working on my valves, guides and seals. I'd buy it again.
Fits my turbine core 2 end exhaust perfectly
easy to work with