2006 CRF80F wouldn't idle at all. Bought this carb kit and 45 mins later running like a top. Worth every penny.
Moose Carburetor Repair Kit
- 78 Reviews
- 44 Questions
Moose Racing has dedicated itself to providing the rider and racer with the highest quality and best performing products available. The finest in hard parts and accessories, Moose Racing offers the most comprehensive list of products in the industry to satisfy all of your riding needs.
- Complete kits to rebuild O.E.M. carburetors.
- Each kit contains all necessary gaskets, O-rings, float valve and jets.
Bought this cause my sons dirt bike does not like to idle. Didnt fix the problem and it seemed to come with extra jets and the main jet was to big big to fit.
I used this for my trx250ex because of all the bad ethanol gas we have in Oregon it eat my carb away. the kit was spot on and cost way less then OEM. put it is and quad ran like a champ.
everything came as described, actually came with a new needle jet, float needle, and springs. also came with new jets though I ordered genuine keihin jets just to be safe.
worked well, did not come with diaphragm so it's only a partial rebuild kit but over all worked well!!
Bike runs amazing now. Thank you.
Last year I took apart, cleaned and reassembled the carb on my sons bike after buying it used full of bad gas. A year later the ethanol demons struck again and clogged up the carb. This rebuild kit made life so much easier and quicker. I simply replaced the parts and put the carb back on the bike. Much faster and easier than disassembling, soaking, cleaning and reassembling. A maintenance manual and a cell phone or digital camera to take pics of your disassembly make this is a very doable project. Best of all, your bike will run like it should once again. Now this bike will only get Ethanol Free gas.
I bought this kit mainly for the jets cause mine has no markings, on the idle screw the slot for the screwdriver wasn't cut all the way so I had to use my old one.
Great kit, perfect fit. Awesome price, will buy again from Motosport
The kit seems fairly well put together. There were no instructions though. Which wasn't a big deal but it came with an O ring I wasn't sure where it was supposed to go. The manual didn't show one like it and there wasn't a similar one when I took carb apart. I like that the needle is brass instead of aluminum. I wish it had a few more parts such as the spring and plastic cup that goes around the throttle cable and the Phillips head screws that holds float bowl and top on. I bought new screws from the hardware store cause mine were a lil rounded from previous owner. And I put my old main jet back in because the one it came with was too rich for my setup. It was the stock size though. Overall the kit worked out well and it is affordable.
Great product installed on my 2007 kx250f everything worked perfectly it doesn't have any directions so you'll need your service manual or just find some carb rebuild videos on YouTube and you'll be good to go
Great kitbeverything went together beautiful. But for someone who doesnt have a lot of knowledge and trying to do it themselves. Instructions and part labeling would be better
The Moose Card kit was easy to install on my 04 KX 125 and works great.
Easily enough installed for anyone mechanically inclined. The bike fires and runs great after a kick or two.
I installed the gaskets frombthe kit. They fit OK at first, but when I went to ride the bike, I turned the petcock on and gas poured out of the float bowl seal. After taking the carb apart AGAIN, I noticed the gasket from this kit had expanded by about 20% and no longer fit in the groove (not even close). Bought an OEM gasket from Yamaha, and no problems since.
This kit comes with all the main parts you need to fix a carburetor! I had to repair an old Suzuki ATV that was sitting for quite a while and this kit had all the parts that were clogged or not working! As soon as I installed all the parts, put in new gas, it fired right up! I definitely recommend this kit! It has exactly what's needed.
The kit had every thing I needed to rebuild carb.
i bought this for an 06 kx450f. the install was easy. everything fit just fine...except for the small o ring in the accelerator pump. it is too thin. i assembled everything and instantly noticed a healthy drip of gas coming out of bottom of the carb. order the oem o ring. it is much thicker and cured the leak. works just dandy now
This is a good kit but should be labelled 3/4 rebuid kit, it has all the jets an gaskets for the main body but was disapointed that it did not come with the o rings for the accelerator pump cover
The jets sizes in JDS004 are 45PJ, 160, 162, 165, 170