I own a 2007 Honda Shadow Aero 750. I installed a set of Vance and Hines pipes and did the Stage 2 Rejet with the Dynojet kit. I'm not a mechanic, but I do work with tools all the time. If you don't have much knowledge about carbs, then I would highly recommend watching some videos on the internet before you attempt this rejet yourself. The instructions are okay, but again, if you don't know what each part is named, you would have a tough time trying to follow the instructions. One tip that saved my butt was when it came to removing the float bowl on the bottom side of the carb, was to loosen the gasket behind the carb and pull it away from the header to get access to the two screws on the back side of the carb. If you don't do this, it is pretty much physically impossible to get to those two screws. Not to mention that the four screws that hold the float bowl on, are on extremely tight and are very easy to strip! I was almost defeated by one of them because I stripped it completely, but was finally able to removed it with some pliers. When you have the carb pulled away from the header, do yourself a favor and do the idle mixture screw adjustment then too, because it's very tough to reach with the carb is attached. The little tool works perfect that they provide, but as I had already reattached the carb, I marked the side of the tool with a sharpie so I knew how many times I was turning it etc. All in all, if you are not mechanically inclined, DON"T attempt this yourself, bring it to a shop and pay them to do it. The end results are great, I can feel a decent difference in power, especially at higher speeds, the gear ratio feels bigger, and I barely use the choke, if at all, when warming the bike up for a minute or two. Sorry for such a long review lol!
Dynojet Stage 1 & 2 Jet Kit
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
There have been no questions asked about the Dynojet Stage 1 & 2 Jet Kit.